Products for 'Display da pannello PCE DPD P '

US$ 1,452.00

ex. VAT, ex. delivery costs

The large display is intended for stationary measurement of relative humidity and temperature and direct display on a large screen. This large display consists of an LED display (100 mm high) and is protected according to IP 54.

Temperature measuring range: 0 … +60 °C (Celsius only)
Humidity measuring range: 10 … 95 % RH
Up to 50 m (164 ft) reading distance
External sensor (wired)

Large Display PCE-G1A

US$ 1,460.00

ex. VAT, ex. delivery costs

The large display is a measuring device for stationary measurement of relative humidity and temperature. This large display consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

Temperature measuring range: 0 … +60 °C (Celsius only)
Humidity measuring range: 10 … 95 % RH
Up to 50 m (164 ft) reading distance
External sensor (wired)
Voltage supply: 230 V AC
with analogue output 4 … 20 mA

Panel Meter PCE-BPD-P-66D

US$ 1,188.00

ex. VAT, ex. delivery costs

The panel meter is designed in such a way that the readings displayed can be read from a long distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for the display is 25 m or 50 m (82 ft or 164 ft).

Function: convert frequency to a usable value
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 11 … 36 V DC

Panel Meter PCE-BPD-P-66A

US$ 1,188.00

ex. VAT, ex. delivery costs

Function: convert frequency to a usable value
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Digital Universal Indicator PCE-BPD-P-66D

US$ 1,188.00

ex. VAT, ex. delivery costs

The digital universal indicator is designed in such a way that the readings displayed can be read from a long distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for the display is 25 m or 50 m (82 ft or 164 ft).

Function: convert frequency to a usable value
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 11 … 36 V DC

Panel Indicator PCE-DPD-Px Series

US$ 229.00

ex. VAT, ex. delivery costs

This multifunction digital panel indicator is a pulse counter, tachometer and and periodometer, for all types of pulse signals, and for all types of applications in the industry. The digital panel indicator has pulse type input signals, and the most common types in the industry are NPN, PNP, Namur, push-pull, inductive, potential-free, quadrature, …

Digital panel indicator with function of pulse counter, tachometer and periodimeter
LED display 6 digits red 14 mm
Signal ranges: counter up to 250 KHz, tachometer up to 500 KHz, periodimeter up to 500 KHz
Functions: Push-pull inputs, NPN, PNP, Namur, pick-up, TTL, inductive, mechanical contact, quadrature signals (encoder)

Digital Universal Indicator PCE-BPD-P-66A

US$ 1,188.00

ex. VAT, ex. delivery costs

Function: convert frequency to a usable value
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Panel Meter PCE-DPD-F2

US$ 450.00

ex. VAT, ex. delivery costs

The built-in display is used to indicate the force and weight, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values on a 6-digit LED display.

Power supply: 11 … 60V DC / 24/48V AC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

Panel Meter PCE-DPD-F1

US$ 434.00

ex. VAT, ex. delivery costs

The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values on a 6-digit LED display.

Power supply: 85 … 265V AC / DC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm