Concrete tester / concrete measuring device PCE-UCD 100
US$ 6,930.00
ex. VAT, ex. delivery costs
The Concrete tester / concrete measuring device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

  • Measurement range: -1677700 µs to +1677700 µs
  • Resolution: 0.05 µs
  • Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
  • Includes a camera for measuring crack width
  • Bandwidth: 1 to 500 kHz
  • Display: 10.1" TFT touchscreen display
  • Internal storage: 8 GB
Concrete Moisture Meter PCE-MWM 210
US$ 5,883.00
ex. VAT, ex. delivery costs

For industrial continuous production of concrete, powders, wood, and other small aggregates when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


  • Measuring range: 0 … 100%
  • The maximum permissible error (absolute): Lab analysis of your sample determines % error
  • Temperature range: +5 … +80 °C  (+41 … +176 °F)
  • Questionnaire starts evaluation process

Concrete tester / concrete measuring device PCE-HT 225E
US$ 3,786.00
ex. VAT, ex. delivery costs

Concrete tester / concrete measuring device, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

 

Concrete Rebound Test Hammer PCE-HT 225E
US$ 3,786.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

In-Process Moisture Sensor for Grain PCE-A-315
US$ 9,558.00
ex. VAT, ex. delivery costs

The PCE-A-315 inline or in-process moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


  • Boasts a measurement range of 5% to 40% for moisture content during  continuous mass flow with an error of just ±0.5% from 5% to 18% grain  moisture
  • Lowers energy costs by enabling shorter drying times and reduces labor costs  by automating the moisture monitoring process
  • Provides nearly maintenance-free operation, delivering consistently accurate  moisture readings over time
  • Analog output of 4 to 20 mA can be converted to digital for dryer control

Moisture Sensor PCE-MWM 240-A
US$ 6,597.00
ex. VAT, ex. delivery costs

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, … is continuously measurable.

  • Stainless sensor rod (250 mm length)
    • Lab analysis of your sample determines % error
    • Measuring range: 0 … 100%
    • Material temperature range: -0 … +80 °C  (+41 … +176 °F)
    • Analog and digital signal output
Concrete Hardness Tester PCE-HT-450
US$ 1,967.00
ex. VAT, ex. delivery costs

 

The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

 

  • Nominal kinetic energy: 4.5 J
  • For high-strength concrete
  • Simple and quick operation
  • For determining concrete hardness
  • Schmidt principle

 

Formaldehyde Meter AQ-500 Set EF
US$ 3,009.00
ex. VAT, ex. delivery costs

The Formaldehyde Meter AQ-500 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air. You can buy the Formaldehyde Meter AQ-500 Set EF here in our online shop.


  • Range Formaldehyde: 0…10 ppm
  • High accuracy and functionality
  • Digital output: RS232 with USB converter
  • Data Logger: 8188 values
  • PC transfer: Software and data cable included

Gas Detector AQ-500 Set EF
US$ 3,009.00
ex. VAT, ex. delivery costs

The Gas Detector AQ-500 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.


  • Range Formaldehyde: 0…10 ppm
  • High accuracy and functionality
  • Digital output: RS232 with USB converter
  • Data Logger: 8188 values
  • PC transfer: Software and data cable included