Torque Meter PCE-CTT 2
US$ 2,570.00
ex. VAT, ex. delivery costs
The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

  • Measuring range: 2 Nm / 1.5 ft-lb
  • Resolution: 0.001 Nm / 0.00074 ft-lb
  • Accuracy: 0.3% of the measuring range
  • USB interface for software connection
  • Integrated printer
Clamp Meter PCE-360-ICA incl. ISO Calibration Certificate
US$ 2,610.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Carbon Dioxide Meter Gas-Pro-2
US$ 2,509.00
ex. VAT, ex. delivery costs

This Carbon Dioxide Meter Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Carbon Dioxide Meter Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


  •  Purpose: Personal protection
  • Sensor type: CO / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)


Clamp Meter PCE-PA 8000-ICA incl. ISO Calibration Certificate
US$ 2,595.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-PA 8000 is a portable handheld Clamp Meter used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

  • True RMS measurement for ACA, ACV
  • True power: W, KW, MW
  • VA, KVA, MVA, VAR, KVAR, MVAR
  • PF (power factor), phase angle (Φ)
  • KWH, KVAH, KVARH, PFH
  • Voltage measurement range: 10 … 600 ACV
  • Current measurement range: 0.2 … 1200 ACA
  • Real-time current, voltage and power consumption measurement
  • Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.
  • Incl. ISO Calibration Certificate

Air Quality Meter Gas-Pro-2
US$ 2,509.00
ex. VAT, ex. delivery costs

This Air Quality Meter Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Air Quality Meter Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


  •  Purpose: Personal protection
  • Sensor type: CO / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)


Color Meter / Colour Meter PCE-CSM 2-ICA incl. ISO-Calibration Certificate
US$ 2,640.00
ex. VAT, ex. delivery costs
ISO Calibration
A very precise Color Meter / Colour Meter with 45°/0° viewing angle. ThIS very professional instrument works in color spaces CIEL*a*b*C*h*, CIEL*a*b*, and CIEXYZ. This kind of Color Meter / Colour Meter is mainly made for the use in an R&D laboratory, for industrial product evaluation or for any kind of color testing application. The meter comes fully equipped (click on detail sheet) and is manufacturer calibrated. - A Color Meter / Colour Meter for industrial professionals and researchers -

  • Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
  • Rechargeable lithium-ion battery
  • Auto white black calibration
  • Designed specifically for the food industry
  • Software Included
  • Stores 100 reference values and 20,000 samples
  • incl. ISO-Calibration Certificate
Force Gage PCE-CTT 2
US$ 2,570.00
ex. VAT, ex. delivery costs
The force gage for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gage for drinking bottles.

  • Measuring range: 2 Nm / 1.5 ft-lb
  • Resolution: 0.001 Nm / 0.00074 ft-lb
  • Accuracy: 0.3% of the measuring range
  • USB interface for software connection
  • Integrated printer
Clamp-On Tester PCE-360-ICA incl. ISO Calibration Certificate
US$ 2,610.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Force Gauge PCE-CTT 2
US$ 2,570.00
ex. VAT, ex. delivery costs
The force gauge for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gauge for drinking bottles.

  • Measuring range: 2 Nm / 1.5 ft-lb
  • Resolution: 0.001 Nm / 0.00074 ft-lb
  • Accuracy: 0.3% of the measuring range
  • USB interface for software connection
  • Integrated printer
Current Clamp PCE-360-ICA incl. ISO Calibration Certificate
US$ 2,610.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Clamp on Tester PCE-PA 8000-ICA incl. ISO Calibration Certificate
US$ 2,595.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-PA 8000 is a portable handheld Clamp on Tester used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

  • True RMS measurement for ACA, ACV
  • True power: W, KW, MW
  • VA, KVA, MVA, VAR, KVAR, MVAR
  • PF (power factor), phase angle (Φ)
  • KWH, KVAH, KVARH, PFH
  • Voltage measurement range: 10 … 600 ACV
  • Current measurement range: 0.2 … 1200 ACA
  • Real-time current, voltage and power consumption measurement
  • Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.
  • Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
US$ 2,529.00
ex. VAT, ex. delivery costs
ISO Calibration
The Clamp-on Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Clamp-on Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Current Clamp PCE-PA 8000-ICA incl. ISO Calibration Certificate
US$ 2,595.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-PA 8000 is a portable handheld Current Clamp used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

  • True RMS measurement for ACA, ACV
  • True power: W, KW, MW
  • VA, KVA, MVA, VAR, KVAR, MVAR
  • PF (power factor), phase angle (Φ)
  • KWH, KVAH, KVARH, PFH
  • Voltage measurement range: 10 … 600 ACV
  • Current measurement range: 0.2 … 1200 ACA
  • Real-time current, voltage and power consumption measurement
  • Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.
  • Incl. ISO Calibration Certificate

CO2 Analyser Gas-Pro-2
US$ 2,509.00
ex. VAT, ex. delivery costs

This CO2 Analyser Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the CO2 Analyser Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


  •  Purpose: Personal protection
  • Sensor type: CO / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)


Gas Detector Gas-Pro-2
US$ 2,509.00
ex. VAT, ex. delivery costs

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


  •  Purpose: Personal protection
  • Sensor type: CO / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)


Colorimeter PCE-CSM 2-ICA incl. ISO-Calibration Certificate
US$ 2,640.00
ex. VAT, ex. delivery costs
ISO Calibration
A very precise Colorimeter with 45°/0° viewing angle. ThIS very professional instrument works in color spaces CIEL*a*b*C*h*, CIEL*a*b*, and CIEXYZ. This kind of Colorimeter is mainly made for the use in an R&D laboratory, for industrial product evaluation or for any kind of color testing application. The meter comes fully equipped (click on detail sheet) and is manufacturer calibrated. - A Colorimeter for industrial professionals and researchers -

  • Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
  • Rechargeable lithium-ion battery
  • Auto white black calibration
  • Designed specifically for the food industry
  • Software Included
  • Stores 100 reference values and 20,000 samples
  • incl. ISO-Calibration Certificate
Spectrophotometer PCE-CSM 2-ICA incl. ISO-Calibration Certificate
US$ 2,640.00
ex. VAT, ex. delivery costs
ISO Calibration
A very precise Spectrophotometer with 45°/0° viewing angle. ThIS very professional instrument works in color spaces CIEL*a*b*C*h*, CIEL*a*b*, and CIEXYZ. This kind of Spectrophotometer is mainly made for the use in an R&D laboratory, for industrial product evaluation or for any kind of color testing application. The meter comes fully equipped (click on detail sheet) and is manufacturer calibrated. - A Spectrophotometer for industrial professionals and researchers -

  • Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
  • Rechargeable lithium-ion battery
  • Auto white black calibration
  • Designed specifically for the food industry
  • Software Included
  • Stores 100 reference values and 20,000 samples
  • incl. ISO-Calibration Certificate
Gas Leak Detector Gas-Pro-2
US$ 2,509.00
ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


  •  Purpose: Personal protection
  • Sensor type: CO / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)