The PCE-VA 20 is a versatile multifunction anemometer for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±  (3% of measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1
• Incl. ISO Calibration Certificate

The Anemometer PCE-WSAC 50-111 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-211 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-121 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-221 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

Compact wind measurer for weather monitoring. Basic wind measurer with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 360°
• Output signal: 4 … 20 mA
• Assembly: pipe assembly / assembly via PG screw connection
• Heating: yes

This anemometer is very economical. With this anemometer you can measure wind speed and air temperature.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
• Incl. ISO calibration certificate

This anemometer is very economical. With this anemometer you can measure wind speed and air temperature.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
• Incl. ISO calibration certificate

The PCE-HVAC 2 is a pitot tube anemometer that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile pitot tube anemometer. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter
• Includes ISO calibration certificate