PCE-VA 20 is a multifunction HVAC meter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1

The AC/DC HVAC meter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC HVAC meter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate

The HVAC Meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC Meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10mm

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"

The compact HVACR tester is characterized by its rotatable housing and the display and the battery supply. Thus, the HVACR tester is ideal for mobile applications, such as test beds.

• Max. 250 bar / 3626 psi
• Rotatable 4.5 digit display
• Battery operation
• Media: gases, fuels and oils
• Pressure: relative
• Diaphragm: Ceramic
• Accuracy class: 0.5

The HVAC meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the HVAC meter can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement

The HVAC meter has two measuring inputs. Each measuring input from the HVAC meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the HVAC meter shows rapid temperature fluctuations.

• Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
• Resolution: 0.01 °C
• Two-channel temperature data logger
• For thermocouples type K, T and J
• Data storage for 20,000 measuring points

The PCE-T390 HVAC meter is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The PCE-T390 HVAC meter has a SD card slot (from 1 to 16 GB) for storing the measured data. The data is stored in xls format on the SD card of the HVAC meter so that no additional software is needed for further analysis.

• 4 input channels for type-K, J temperature sensors
• 2 input channels for Pt100 temperature sensors
• 2 x type-K TF-500 temperature sensors are included in the package
• SD card memory (1 … 16 GB)

PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries. This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable). Please note: Pressure sensors are sold separately.

• Measuring range: 0 to 400 bar / 0 to 5801 psi, depending on sensor
• Measures system pressure in all media (e.g., gasses, liquids, etc.)
• Offers min, max and hold functionality 

The PCE-HT110 HVAC Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.

• Measurement ranges: 0 … 50°C / 32 … 122°F, 10 … 90% RH
• Resolution: 0.1°C / 0.18°F, 0.1% RH
• Data format: .XLS (compatible with Microsoft Excel)

The HVACR tester detects air temperature and humidity and stores readings in its internal memory. The HVACR tester has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

• Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
• Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
• Resolution: 0.5% RH / 0.1°C (0.18°F)
• Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
• Incl. ISO calibration certificate

The temperature / humidity HVAC meter is a data logger has a memory of 20,010 sets of measurements and allows use of up to several months. The temperature / humidity HVAC meter is particularly suitable for measuring tasks where it is not possible for the user to install software for reading the measured values.

• Measuring range temp.: -30 … 60 °C / -22 … 140 °F
• Measuring range rel. humidity: 0 … 100% RH
• Measurement protocol as PDF
• Data export possible as CSV
• Readable without software
• 20,010 sets of measured values can be stored
• incl. ISO Calibration Certificate