With the HVAC meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The HVAC meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.

• Internal probe
• Temperature: -20°C … 60°C / -4 … 140°F
• Relative humidity: 10 … 90% r.H.
• Temperature of global: -22°C … 60°C / -8 … 140°F
• Humidity: -68°C … 60°C / -90 … 140°F
• Dew point temperature: depending on the sensor

• External probe
• Temperature: -50° C … 500° C / -58 … 932°F

PCE-HVAC 2 is a high-velocity multifunction HVAC meter with a pitot tube. This portable HVAC meter can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter

This HVAC meter is very economical. With this HVAC meter you can measure wind speed and air temperature. The readings can be stored in the device and then transferred to a computer for further analysis. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

The HVAC meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units only
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10 mm
• including magnetic sensor

The PCE-779N-ICA HVAC Meter measures temperatures quickly and without contact. The HVAC meter can be used for almost all surfaces. The emissivity of the HVAC meter is adjustable over the range of 0.1 … 1.0. The HVAC meter has various measurement functions such as max, min and average measurement.

• OLED-Display
• Measuring range: -60 … 760°C / -76 … 1400°F
• Additional thermocouple measurement -64 … 1400°C / -83.2 … 2552°F
• Dual Laser
• Resolution: 0.1°C / 0.18°F at -83.2 … 999.9°C (-117.8 … 1831.8°F), otherwise 1°C / 1.8°F
• incl. ISO Calibration Certificate

The HVAC meter has two measuring inputs. Each measuring input from the HVAC meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the HVAC meter shows rapid temperature fluctuations.

• Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
• Resolution: 0.01 °C
• Two-channel temperature data logger
• For thermocouples type K, T and J
• Data storage for 20,000 measuring points
• incl. ISO Calibration Certificate

The PCE-CL 20 is a HVAC meter or locator used to detect live and voltage-free electrical wires. This HVAC meter also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.

• Output signal: 125 kHz
• Compatible with one- or two-pole circuits
• Automatic, manual and UAC measuring modes 

The HVAC Meter is a rechargeable handheld pistol-grip videoscope or video borescope inspection camera with video recording and image capture functionality. Equipped with built-in LED lighting on the waterproof camera tip, the HVAC Meter features a detachable remote control with integrated 3.5" LCD for easy viewing and navigation. The remote control communicates using radio transmission at 2.4 GHz.

The HVAC Meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC Meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10mm

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"

PCE-VA 20 is a multifunction HVAC meter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1

PCE-917 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
• Resolution: 500 Pa / 0.0725 psi / 0.005 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory

With the PCE-890U HVAC meter, measurements of surface temperatures can be carried out quickly and easily. Since the HVAC meter uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The HVAC meter makes it easy to measure objects from a distance that are difficult to access.

• Measuring range: -50 … 1150°C / -58 … 2102°F
• Accuracy: ± 1.5% ± 2°C / 3.6°F (0 … 500°C / 32 … 932°F)
• Resolution: 0.1°C / 0.18°F (<1000°C / 1832°F)
• Emission level: 0.1 … 1

PCE-910 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory

The HVAC Meter PCE-P50 Differential Pressure with highest accuracy and best performance. With this HVAC meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The HVAC meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 6900mbar / ± 100 psi
• Resolution: 4mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device