Query results | PCE Instruments

US$ 3,801.00

ex. VAT, ex. delivery costs

The PAT Tester is a versatile ohmmeter. With this earth tester / earth resistance meter a variety of resistance measurements can be performed. Thus, with the PAT Tester, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

Interference currents, interference voltages, frequencies
Direct and indirect resistance measurement
Data memory for later analysis on the PC
Mobile use thanks to battery and batteries

PAT Tester PCE-IT 150

US$ 2,450.00

ex. VAT, ex. delivery costs

The PAT tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 … 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the PAT tester.

Insulation resistance: 0 … 30 TΩ
Accuracy: ± (5% of Mw.+5 digits)
Test voltage: 500 V … 15 kV
Direct alternating voltage: 30 … 600 V
Accuracy: ± (2.0% v.Mw. +3 digits)
Polarisation index PI
Dielectric absorption ratio DAR
Memory and software

PAT Tester/ Portable Appliance Testing Eqpt PCE-EVSE-KIT2-ICA incl ISO Cal Cert.

US$ 1,944.00

ex. VAT, ex. delivery costs

An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The PAT Tester is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket
incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)

PAT Tester / Portable Appliance Testing Equipment PCE-EVSE-KIT2

US$ 1,623.00

ex. VAT, ex. delivery costs

The Portable Appliance Testing Equipment is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket

PAT Tester PCE-IT414

US$ 1,460.00

ex. VAT, ex. delivery costs

The PAT Tester belong to a series of highly accurate resistance devices that have a 6 digit display. These PAT Testers have been developed specifically for technical service and for difficult measurement conditions.

For professionals
6 digit LCD
Measurements according to VDE 0413 part 1
Test tension up to 10,000V

PAT Tester / Portable Appliance Testing Equipment PCE-ITE 50

US$ 1,402.00

ex. VAT, ex. delivery costs

The PCE-ITE 50 is a robust PAT Tester with a large 3.5" TFT color LCD display. The PAT Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

3.5" color TFT LCD display
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
SD card and Bluetooth
Dual display
Good / bad FI test
Low Ohm measurement
Up to 1000V terminal voltage

PAT Tester PCE-IT413

US$ 1,233.00

ex. VAT, ex. delivery costs

The PAT Tester belongs to a series of highly accurate resistance devices that have a 6 digit display. These PAT Testers have been developed specifically for technical service and for difficult measurement conditions.

For professionals
6 digit LCD
Measurements according to VDE 0413 part 1
Test tension up to 5,000V

PAT Tester / Portable Appliance Testing Equipment PCE-ITE 55B

US$ 1,126.00

ex. VAT, ex. delivery costs

The PAT tester is a multifunctional measuring instrument designed for testing electrical safety in accordance with standards EN 61557 and DIN VDE 0100. It offers many functions specifically designed for the inspection and evaluation of electrical installations. The PAT tester can provide precise measurement of insulation and protective conductor resistance, RCD testing (residual current device), and other parameters necessary for VDE testing.

Testing according to: EN 61557 and DIN VDE0100
Insulation resistance R-Iso up to 999 Ω

RCD Type A, AC, B, B+ and F
Adjustable fault current 6 … 500 mA

Line and fault loop impedance
Continuity test R-Low
Voltage, phase rotation, and frequency
Testing of EV charging stations
(with optional test adapter)

PAT Tester / Portable Appliance Testing Equipment PCE-ITE 55A

US$ 1,039.00

ex. VAT, ex. delivery costs

The PAT tester is a multifunctional measuring device designed for testing electrical safety in accordance with the standards EN 61557 and DIN VDE 0100. The PAT tester offers many functions specifically designed for the inspection and assessment of electrical installations. It can provide precise measurements of insulation and protective conductor resistance, RCD (Residual Current Device) testing, and other parameters necessary for a VDE examination.

Testing according to: EN 61557 and DIN VDE0100
Insulation resistance R-Iso up to 999 Ω

RCD Type A and AC
Adjustable fault current 6 … 500 mA

Line and fault loop impedance
Continuity test R-Low
Voltage, phase sequence, and frequency
Testing of EV charging stations
(with optional test adapter)