The mobile 3-phase power meter Easycount-3-32-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile 3-phase power meter are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54
- Counter calibrated

The mobile power analyzer Easycount-3-32-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile power analyzer are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54
- Counter calibrated

The mobile power meter Easycount-3-32-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile power meter are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54
- Counter calibrated

The mobile electrical tester Easycount-3-32-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile electrical tester are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54
- Counter calibrated

The mobile 3-phase power meter Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile 3-phase power meter are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54

The mobile power analyzer Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile power analyzer are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54

The mobile power meter Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile power meter are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54

The mobile electrical tester Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile electrical tester are equipped with a CEE plug and a CEE coupling.

- Display: 6+1 roller counter
- Resolution: 0.1 kWh
- Degree of protection meter: IP 54

The Three-Phase Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Three-Phase Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. 

- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 3-Phase Power Meter / 3-Phase Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter / 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

The process controller / temperature controller is a simple temperature controller for control tasks. The input signal of the thermostat is processed by thermocouples type J in different temperature ranges. Optionally the simple temperature controller can also be equipped with a PID switch.

- Power supply: 85 ... 253 V AC / DC
- Sensor Input: Thermocouple type J
- Measuring ranges: up to max. 900 °C (selectable)
- Output: Relay or SSR output (selectable)

The PCE-830-3 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)