FME is a handheld paper moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.
- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
The moisture analyzer is a sensor for measuring moisture of sand and liquids consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture analyzer is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, and fuels (CWF).
- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 10% (water mass fraction))
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C
Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.
The PCE-MA 202 is an oven-drying absolute moisture meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the absolute moisture meter and the moisture content is subsequently calculated from the difference between the initial and final weight.
- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 10 mg / 0.01 g / 0.1%
- Adjustable drying temperature and time
The handheld wall moisture meter is for accurate measurement of the moisture content of paper, wood and building materials. The wall moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the wall moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.
- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
PCE-WP24 is a timber absolute moisture meter used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.
- Moisture content measuring range: 4% ... 60% wood, 0% ... 10% building
materials
- Resolution: 0.1%
- Accuracy: ±0.7%
The handheld building moisture meter is for accurate measurement of the moisture content of paper, wood and building materials. The building moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the building moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.
- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
PCE-WP24 is a timber absolute moisture meter used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.
- Moisture content measuring range: 4% ... 60% wood, 0% ... 10% building
materials
- Resolution: 0.1%
- Accuracy: ±0.7%
PCE-WMH-3 is a portable handheld digital timber moisture meter or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.
- Measuring range: 6 ... 60 % moisture content
- Accuracy: ±1 % (within 6 ... 12 % range), ±2 % (13 ... 28 %), ±2 % (29 ... 60 %)
- Resolution: 0.1 %
PCE-MA 110 is an absolute moisture meter or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The absolute moisture meter uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the absolute moisture meter can be performed at any time using the automatic calibration function and the included 100 g weight.
- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- Incl. ISO calibration certificate
The Timber Moisture Meter FMC can accurately measure absolute humidity in diverse building materials. To detect humidity, the Timber Moisture Meter has a connection for external sensors which can either be inserted into the building material or placed on it.
- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials
The absolute moisture meter PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the absolute moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.
- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- incl. ISO Calibration Certificate
For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.
- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C (+41 ... +176 °F)
- Questionnaire starts evaluation process