Lux Meter PCE-170 A to 40,000 lux, internal sensor, automatic zero adjustment. The lux meter has a large measurement range, short response time and a compact housing allowing for quick, effortless one-hand operation.
- Measurement range: 0.00 to 40,000 lux
- Resolution: 0.01 lux in the range 39.99 Lux
- Large 5-digit LCD display
- Sensor: silicon photodiode
Environmental Tester PCE-170 A to 40,000 lux, internal sensor, automatic zero adjustment. The Environmental Tester has a large measurement range, short response time and a compact housing allowing for quick, effortless one-hand operation.
- Measurement range: 0.00 to 40,000 lux
- Resolution: 0.01 lux in the range 39.99 Lux
- Large 5-digit LCD display
- Sensor: silicon photodiode
Environmental Meter to 40,000 lux, internal sensor, automatic zero adjustment. The environmental meter has a large measurement range, short response time and a compact housing allowing for quick, effortless one-hand operation.
- Measurement range: 0.00 to 40,000 lux
- Resolution: 0.01 lux in the range 39.99 Lux
- Large 5-digit LCD display
- Sensor: silicon photodiode
Light Meter PCE-170 A to 40,000 lux, internal sensor, automatic zero adjustment. The light meter has a large measurement range, short response time and a compact housing allowing for quick, effortless one-hand operation.
- Measurement range: 0.00 to 40,000 lux
- Resolution: 0.01 lux in the range 39.99 Lux
- Large 5-digit LCD display
- Sensor: silicon photodiode
The NDT test instrument PCE-VE 355N3 is a two-way articulating videoscope, inspection camera, industrial endoscope or borescope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.
- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m / 9ft 10"
PCE-HT 225E is a roll hardness test hammer, also called a rolled paper rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.
- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included
The PCE-830 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.
- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm diameter / 2.2 in
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate
The NDT test instrument PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.
- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"
The PCE-830-3 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.
- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate
PCE-VE 380N is an industrial borescope or inspection camera with a handheld monitor that allows you to gain valuable visual insight into the inner workings of machines and other small spaces such as ventilation ducts, drainpipes and downpipes, sewer pipes, chimneys and more. This semi-flexible / semi-rigid waterproof inspection camera is ideal for a variety of industrial and trade applications. Images and videos can be stored directly on the device or on the included SD memory card.
- Diameter camera head: 28 mm / 1.1"
- Camera head waterproof
- Camera cable length: 30 m / 98 ft 5"
- SD memory card
- Bright LED lighting