Air Quality Station PCE-AQD 10-ICA incl. ISO Calibration Certificate
US$ 739.00
ex. VAT, ex. delivery costs
ISO Calibration
The Air Quality Station is used to measure air quality. The Air Quality Station measures carbon dioxide, temperature and humidity. The CO2 sensor from the Air Quality Station is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (only for CO2)
Air Quality Station PCE-RCM 10
US$ 277.00
ex. VAT, ex. delivery costs

PCE-RCM 10 is a portable handheld air quality station or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this air quality station also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: -20 ... +70 °C / -4 ... +158 °F
- Humidity measuring range: 0 ... 100 % RH
- 2.4" full-color LCD with user-friendly graphics
- For indicative measurements

Air Quality Station PCE-AQD 50-ICA incl. ISO calibration certificate
US$ 653.00
ex. VAT, ex. delivery costs
ISO Calibration
The air quality station is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The air quality station is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months
- incl. ISO calibration certificate
Air Quality Station PCE-RCM 8
US$ 245.00
ex. VAT, ex. delivery costs
The Air Quality Station PCE-RCM 8 performs many measuring tasks. For example, the Air Quality Station can measure mass concentration, formaldehyde and TVOC. This Air Quality Station is specially designed for indoor measurement. 

- Formaldehyde in mg / m³
- Measurement of TVOC
- Temperature measurement
- Alarm function
- Mass concentration
Air Quality Station PCE-COG 10
US$ 380.00
ex. VAT, ex. delivery costs
Topseller
The air quality station has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the air quality station also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery
Air Quality Station PCE-RCM 05
US$ 219.00
ex. VAT, ex. delivery costs
The Air Quality Station PCE-RCM 05 is used to continuously measure the particulate matter content at the workplace. The Air Quality Station displays PM2.5 particulate matter as well as temperature and humidity on the display. 

- Measuring range PM2.5: 0 ... 500 μg / m³
- Measuring range temperature: -10 ... 50°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Pictograms indicate air quality
- Battery operation
- Micro USB for charging
WiFi Measuring Station for Air Quality PCE-THT 10-ICA incl ISO Calibration Cert.
US$ 527.00
ex. VAT, ex. delivery costs
ISO Calibration
The WiFi measuring station for air quality has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the WiFi measuring station for air quality can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface
- incl. ISO Calibration Certificate
Weather Station PCE-HT 300
US$ 606.00
ex. VAT, ex. delivery costs
The Weather Station PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The Weather Station stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV
Weather Station PCE-WS RS485
US$ 548.00
ex. VAT, ex. delivery costs
The Weather Station impresses with its compact design and various output signals. The Weather Station can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  Modbus RTU
- IP 65 protection 
- mA, V, pulse or Modbus output
Air Quality Station PCE-CMM 10
US$ 317.00
ex. VAT, ex. delivery costs
The air quality station is a multi-function meter for measuring the air quality. This Air Quality Station measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Air Quality Station PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The Air Quality Station from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this Air Quality Station is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Weather Station PCE-WL 1-ICA incl. ISO Calibration Certificate
US$ 729.00
ex. VAT, ex. delivery costs
ISO Calibration

The Weather Station PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the airflow meter for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The Weather Station PCE-WL 1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.
- incl. ISO Calibration Certificate 

Air Quality Station PCE-HT 120
US$ 296.00
ex. VAT, ex. delivery costs
The Air Quality Station is used to measure temperature and humidity. The measurement data from the Air Quality Station are displayed in an app on the tablet or smartphone and the display.

Measuring function
- Humidity
- Temperature
- Dew point
- Wet bulb temperature
- Ethernet: WLAN / WIFI
- Accespoint and client mode
- Connection for external PT1000 sensor
Air Quality Station PCE-CMM 8-ICA incl. ISO Calibration Certificate
US$ 395.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Air Quality Station you can ensure the right climate in your office. The Air Quality Station measures the CO2 content of the air, the relative humidity and the room temperature. The Air Quality Station shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls
- incl. ISO Calibration Certificate (for CO2 only)
WiFi Measuring Station for Air Quality PCE-THT 10
US$ 298.00
ex. VAT, ex. delivery costs
Wireless
The WiFi measuring station for air quality has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the WiFi measuring station for air quality can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface
Air Quality Station PCE-CMM 8
US$ 245.00
ex. VAT, ex. delivery costs
Topseller
With the Air Quality Station you can ensure the right climate in your office. The Air Quality Station measures the CO2 content of the air, the relative humidity and the room temperature. The Air Quality Station shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls
Air Quality Station PCE-EM 880
US$ 228.00
ex. VAT, ex. delivery costs
The air quality station is equipped with various sensors to determine HCHO, TVOC, ambient temperature and ambient humidity. The air quality station thus already covers a large spectrum of measuring tasks.

- HCHO measuring range: 0.00 … 5.00 mg/m³
- TVOC measuring range: 0.00 … 9.99 mg/m³
- Temperature measuring range: 0 … 50 °C / 32 … 122 °F
- Humidity measuring range: 0 … 100% RH
- Memory for 5000 measuring points
- Battery and mains operation
Weather Station / Wind Speed Alarm PCE-WSAC 50
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WSAC 50 is a weather station that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This weather station allows measurement of the slightest wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate