Products for 'vibration meter pce instruments replacement acceleration sensor for pce hav 100'

Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100

US$ 6,593.00

ex. VAT, ex. delivery costs

The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs

- Resolution: 0.05 µs

- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks

- Includes a camera for measuring crack width

- Bandwidth: 1 to 500 kHz

- Display: 10.1" TFT touchscreen display

- Internal storage: 8 GB

Vibration Data Logger PCE-VM 5000-KIT-ICA incl. ISO Calibration Certificate

US$ 4,355.00

ex. VAT, ex. delivery costs

The 4-channel PCE-VM 5000 Vibration Data Logger performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration data logger is able to record vibrations at different points of the component to be tested.

- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration
- Including ISO Calibration Certificate

Vibration Meter PCE-VT 3900

US$ 1,711.00

ex. VAT, ex. delivery costs

The vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

- Acceleration:

0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²

- Velocity:

0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s

- Displacement:

0.000 ... 3.9 mm / 0.000 - 0.154 in

- Automatic ISO 10816-3 evaluation

- Data logger

- FFT analysis

- Route measurement

- Rechargeable battery

- Color graphic display

Gloss Meter PCE-IGM 100

US$ 3,202.00

ex. VAT, ex. delivery costs

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

Tri-Axial Accelerometer without Sensors PCE-VM 31

US$ 2,638.00

ex. VAT, ex. delivery costs

The PCE-VM 31 Tri-Axial Accelerometer is designed for measuring human vibration at the workplace. The Accelerometer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

NDT Test Instruments PCE-IGM 100-ICA incl. ISO calibration certificate

US$ 3,361.00

ex. VAT, ex. delivery costs

Vibration Data Logger PCE-VM 5000

US$ 2,924.00

ex. VAT, ex. delivery costs

The 4-channel PCE-VM 5000 Data Logging Instrument performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested. These Data Logging Instrument are manufacturer calibrated. An ISO calibration certificate is an option.

- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card

Vibration Analyzer PCE-VT 3950

US$ 2,001.00

ex. VAT, ex. delivery costs

The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 ... 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Data logger: 50 memory locations with 43200 measured values each
- FFT analysis
- Route measurement
- Rechargeable battery
- Color graphic display
- incl. headset

Vibration Meter PCE-VM 25

US$ 1,968.00

ex. VAT, ex. delivery costs

The PCE-VM 25 Vibration Meter is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration Meter can be used for the measurement of a large range of parameters including acceleration, velocity and displacement.

- Vibration velocity 10 Hz ... 10 kHz, displacement to 60 mm
- True RMS, Max Hold, peak value
- OLED display
- Measurement memory
- VMID measuring point function

Radiation Detector PCE-LMD 100

US$ 4,923.00

ex. VAT, ex. delivery costs

The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
A in accordance with DIN 5032-7

- External sensor with multifunction button

- 8 GB measured value memory

Air Quality Particle Counting PCE-CPC 100

US$ 6,137.00

ex. VAT, ex. delivery costs

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

Vibration Meter / Vibration Tester PCE-VM 3D

US$ 1,319.00

ex. VAT, ex. delivery costs

The Vibration Meter / Vibration Tester enables a quick and very simple measurement of the acceleration, the vibration path and the vibration speed for testing vibrations on machines and components. The Vibration Meter / Vibration Tester can measure vibrations in three directions, i.e. on the x, y and z axes. Defects or excessive imbalances can be precisely identified with the Vibration Meter / Vibration Tester.

- Frequency range: 10 Hz ... 10 kHz
- Acceleration, speed and displacement
- Large backlit LCD display
- Three display options

Vibration Analyzer PCE-VT 3950S

US$ 2,133.00

ex. VAT, ex. delivery costs

Vibration Data Logger PCE-VM 22

US$ 3,545.00

ex. VAT, ex. delivery costs

The vibration data logger has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration data logger can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer
- Infrared temperature measurement
- 4 GB data memory
- FFT analysis and wave view of the vibration

Vibration Meter PCE-VT 3750S

US$ 1,420.00

ex. VAT, ex. delivery costs

The vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

- Acceleration:

0.0 - 399.9 m/s² / 0.0 - 15744 in/s²

- Velocity:

0.00 - 399.99 mm/s / 0.00 - 15.74 in/s

- Displacement:

0.000 - 3.9 mm / 0.000 - 0.154 in

- Automatic ISO 10816-3 evaluation

- Colored graphic display

- incl. headset

Vibration Meter PCE-VT 3850S

US$ 1,499.00

ex. VAT, ex. delivery costs

The vibration meter is the ideal companion for checking vibrating parts, machines and systems. With the external vibration sensor on the vibration meter, the vibration displacement up to 3.9 mm, the vibration velocity up to 399.9 mm/s and the vibration acceleration up to 399.9 m/s² can be determined.

Measuring ranges

- Acceleration:

0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²

- Velocity:

0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s

- Displacement:

0.000 ... 3.9 mm / 0.000 - 0.154 in

- Automatic ISO 10816-3 evaluation

- Data logger

- Rechargeable battery

- Color graphic display

- Measuring tip with handgrip

- incl. headset

NDT Tester - Gloss Meter PCE-IGM 100

US$ 3,202.00

ex. VAT, ex. delivery costs

A gloss meter is a tester for determining surface gloss. Thereby, with the gloss meter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

Building vibration data logger / Seimographic data logger

US$ 5,280.00

ex. VAT, ex. delivery costs

The PCE-VM 40C Vibration data Logger with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Vibration data Logger measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Data Logger can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. Features a micro SD card, GSM modem (optional), warning and alarm leds, relay output, SMS alerts, and an internal battery. These vibration logging test instruments are manufacturer calibrated. An ISO calibration certificate is an option.

- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Quad band GSM (optional)
- SMS alarm notifications
- Memory size of 100,000 values (SD card)
- Integrated NiMH battery
- FFT analysis, XYZ and vector sum display