Products for 'thermo hygrometer pce instruments thermo hygrometer pce ht 114 ica incl iso calibration certificate'

Tension Dynamometer PCE-DDM 20-ICA incl. ISO Calibration Certificate

US$ 4,183.00

ex. VAT, ex. delivery costs

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate

Hygrometer PCE-HT 420IoT

US$ 501.00

ex. VAT, ex. delivery costs

The hygrometer records humidity and air temperature and stores it internally. This compact and robust hygrometer in mini format and with a large memory (up to a maximum of 32,000 values / 16,000 values per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate control rooms).

- Temperature: -40 ... 70 °C / -40 ... 158 °F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6 °F)
- Operating temperature: -40 ... 80 °C / -40 ... 176 °F, max. 80% rH
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet with MQTT function
- Power supply or PoE (selectable)

Clamp Meter PCE-830-1-ICA incl. ISO Calibration Certificate

US$ 3,788.00

ex. VAT, ex. delivery costs

The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Clamp on Tester PCE-830-1-ICA incl. ISO Calibration Certificate

US$ 3,788.00

ex. VAT, ex. delivery costs

The PCE-830 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp on Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

Power Meter PCE-830-1-ICA incl. ISO Calibration Certificate

US$ 3,788.00

ex. VAT, ex. delivery costs

The PCE-830 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

Power Analyzer PCE-830-1-ICA incl. ISO Calibration Certificate

US$ 3,788.00

ex. VAT, ex. delivery costs

The PCE-830 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

Electrical Tester PCE-830-2-ICA incl. ISO Calibration Certificate

US$ 4,192.00

ex. VAT, ex. delivery costs

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

Current Clamp PCE-830-2-ICA incl. ISO Calibration Certificate

US$ 4,192.00

ex. VAT, ex. delivery costs

The PCE-830 Current Clamp is used for measuring one to three phases of electrical quantities for alternating current (AC). This Current Clamp also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

Hygrometer PCE-DPM 3

US$ 1,359.00

ex. VAT, ex. delivery costs

The hygrometer PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This hygrometer measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

Roughness Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate

US$ 3,338.00

ex. VAT, ex. delivery costs

The roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range: Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces
- Incl. ISO calibration certificate

Surface Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate

US$ 3,338.00

ex. VAT, ex. delivery costs

The surface testing - roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the roughness tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

Current Clamp PCE-PA 8500-ICA incl. ISO-Calibration Certificate

US$ 4,897.00

ex. VAT, ex. delivery costs

The current Clamp redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The current Clamp allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate

Electrical Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate

US$ 4,897.00

ex. VAT, ex. delivery costs

The electrical tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The electrical tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate

Power Meter PCE-PA 8500-ICA incl. ISO-Calibration Certificate

US$ 4,897.00

ex. VAT, ex. delivery costs

The power meter redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The power meter allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate

Power Analyzer PCE-PA 8500-ICA incl. ISO-Calibration Certificate

US$ 4,897.00

ex. VAT, ex. delivery costs

The power analyzer redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The power analyzer allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate

Material Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate

US$ 3,338.00

ex. VAT, ex. delivery costs

The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

Force Gauge PCE-DDM 20-ICA incl. ISO Calibration Certificate

US$ 4,183.00

ex. VAT, ex. delivery costs

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate

NDT Test Instruments PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,196.00

ex. VAT, ex. delivery costs

The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate