The force gage measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gages.

Dynamometer PCE-DFG N 5K
- Measuring range: 0 ... 5000 N / 500 kg / 1100 lbs
- Resolution: 1N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Test Stand PCE-MTS500
- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel path: max. 300 mm / 11.8"
- Feed speed: 30 mm/min ... 230 mm/min / 1.18 ... 9.05 in/min

Our test stand for force gauge PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The test stand for force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the test stand for force gauge offers the operator the most precise equality of test bench and sample.

- Measuring range: max. 5000 N / 500 kg
- Feed speed: 30 mm/min ... 230 mm/min
- All PCE devices adaptable
- Robust steel design

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The force gauge measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gauges.

Force Gauge PCE-DFG N 5K
- Measuring range: 0 ... 5000 N / 500 kg / 1100 lbs
- Resolution: 1N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Test Stand PCE-MTS500
- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel path: max. 300 mm / 11.8"
- Feed speed: 30 mm/min ... 230 mm/min / 1.18 ... 9.05 in/min

The PCE-TG 300-NO2 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: 3.0 … 300.0 mm / 0.118 ... 11.81" (steel)
- Diameter: 14 mm / 0.55"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 2.5 MHz
- Bluetooth
- incl. ISO calibration certificate

The PCE-TG 300-NO7 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: 0.65 ... 200 mm / 0.025 ...  7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth
- incl. ISO calibration certificate

The PCE-TG 300-NO5 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gage
Digital force gage for tensile force measurement and compressive force measurement up to 500 N. The digital force gage is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

Our test stand for force gauge PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The test stand for force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the test stand for force gauge offers the operator the most precise equality of test bench and sample.

- Measuring range: max. 5000 N / 500 kg
- Feed speed: 30 mm/min ... 230 mm/min
- All PCE devices adaptable
- Robust steel design

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

PCE-VE 200-S3 is a car measuring device, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This car measuring device provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.

- 3.7 mm / 0.14 in diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

The PCE-TG 300-NO5/90 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

The pressure gauge has a two-line display. The pressure gauge can represent pressures up to 600 bar, relative or absolute. The parts of the pressure gauge that come in contact with liquids are made of stainless steel. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is an option.

- Measurement Max. 600 bar / 8702 psi
- Rotating display / Battery operated
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1

Our universal testing machine can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized universal testing machine lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the universal testing machine offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
- incl. software
- incl. force gauge PCE-DFG N 5K (0 ... 5000 N)

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges / tension dynamometers. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
- incl. software
- incl. force gauge PCE-DFG N 5K (0 ... 5000 N)

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

PCE-MA 110 is a halogen moisture test instrument or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

 

- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- Incl. ISO calibration certificate

PCE-VE 200-S is an car measuring device, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This car measuring device provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.

- 3.7 mm / 0.14 in diameter
- 1 m / 3.28 ft cable length
- 180° image rotation

The NDT test instrument is an inspection camera for non-destructive measurements. Thus the NDT test instrument is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the NDT test instrument.

- Camera head diameter: Ø 9 mm / 0.4"
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Storage: Micro SD card
- Front and side view cameras