An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. Such electrostatic charges can be detected with the environmental meter.

- Measuring range: ±60 kV DC
- Acoustic signal when the measured value is exceeded
- Temperature and humidity display
- Laser for aligning the measuring device

The temperature meter for deep-frying oil PCE-FOT 10 is a measuring device with which you can determine the quality of different types of oil, e.g. frying oil in french fries, restaurants. This cooking oil measuring device is also used successfully by food inspectors.

- Measuring range temperature: 30 ... 200°C / 86 ... 392°F
- Measuring range oil (PC value): 0.5 ... 40% polar parts
- Measuring accuracy oil (PC value): ± 3% (at 30 ... 90°C / 86 ... 194°F)
- Resolution oil (PC value): 0.1%
- Area of ​​application: deep-frying oils
- For determining the deep-frying oil TPM (Total Polar Materials) value

The temperature data logger is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the temperature data logger determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 2.5 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs

The PCE-IR10 temperature meter is made up of a small sensor head and a separate electrical component. The temperature meter sensor is so small that it can fit in almost any space. part from this, the device offers similar specifications as other devices. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option. In general our laboratory adjusts the temperature meter to two temperature points.

- Temperature range: -40 ... 600°C / -40 ... 1112°F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

 

Suitable for determining the humidity of bulk substances, this moisture test instrument can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances. These test instruments / test sensors are mainly for use in manufacturing processes to give the opportunity of process optimization to the manufacturer or to insure the moisture content of the final product.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. Such electrostatic charges can be detected with the gauss meter.

- Measuring range: ±60 kV DC
- Acoustic signal when the measured value is exceeded
- Temperature and humidity display
- Laser for aligning the measuring device

For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.

- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: -40 ... +150 °C  (-40 ... +302 °F)
- Current consumption: 200 mA
- Power supply : 24 (18 ... 36) VDC
- Questionnaire starts evaluation process
- Application: pellets, wood chips

The PCE-779N Temperature Meter measures temperatures quickly and without contact. The temperature meter can be used for almost all surfaces. The emissivity of the temperature meter is adjustable over the range of 0.1 ... 1.0. The temperature meter has various measurement functions such as max, min and average measurement. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option. In general our laboratory adjusts the temperature meter to two (linear) temperature points.

- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F

The industrial borescope gives you new, visual insights into the interior of motors and systems. The industrial borescope is the ideal tool for maintenance and repair in workshops or industrial companies. Optical analysis with an industrial borescope has never been so easy.

- Cable length:  1000 mm, 3.28 ft
- Cable diameter:  2.1 mm, 0.08"
- 0° viewing angle
- Camera resolution / image sensor: 400 x 400 Px
- Cable type: flexible
- Video output: HDMI
- LED light

The infrared temperature data logger is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This infrared temperature data logger allows the user to program specific time intervals for taking measurements, such as over an entire week.

- Non-Contact temperature measurement (infrared)
- Sampling rate: 1/ sec.
- Memory size: 12,000 values
- Adjustable date and time
- Printer, memory, data Logger integrated
- Incl. ISO calibration certificate

The temperature meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the temperature meter can measure the volume flow and the ambient temperature.

- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s
- Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
- Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047"
- Data memory for 960 measured values
- Wind speed
- Volume flow
- Temperature measurement
- incl. ISO Calibration Certificate (wind speed function only)

The Temperature Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Temperature Data Logger with microprocessor is ideal for use with various Pt100 sensors. These temperature logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2% r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values