PCE-VE 320HR is a car measuring device, videoscope, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This car measuring device is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

- Diameter camera head: Ø 5.5mm / 0.22"
- Cable length: 1 m / 3ft 3"
- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Interface: Mini-USB 1.1 und AV out
- Memory: 8 GB SD memory card (incl.)

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

The closing force measuring device is an electronic measuring device for power-operated windows, sliding roofs and doors in the automotive sector and for sliding steps in the rail vehicle sector.

- Measuring range: 0 ... 600 N
- Accuracy: +/- 3N (0-100N) +/- 3% (>100N)
- PC evaluation software PinchPilot
- Memory for 100 measurements
- Applicable standards – 2000/4/EC or user defined
- incl. ISO calibration certificate

- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ±10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems
- Data transmission: RS-232 serial interface

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

The closing force measuring device is an electronic force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 75 N
- Spring stiffness: 5 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- incl. ISO calibration certificate

PCE-VE 330N is a car measuring device, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This car measuring device is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 2 m / 6ft 6"

PCE-VE 200 is a car measuring device for nondestructive evaluation (NDE) and machine diagnostics. The car measuring device provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.

Borescope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.

- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator 

 

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

The closing force measuring device is an electronic force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 200 N
- Spring stiffness: 20 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- Support of relevant standards – US Standard FMVSS 118
- incl. ISO calibration certificate

The closing force measuring device is an electronic force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 260 N
- Spring stiffness: 65 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- Support of relevant standards – US Standard FMVSS 118
- incl. ISO calibration certificate

The closing force measuring device is an electronic force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 75 N
- Spring stiffness: 5 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- incl. ISO calibration certificate

PCE-VE 200 is a car measuring device or inspection camera, for nondestructive evaluation (NDE) and machine diagnostics. The car measuring device provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180 ° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.

Automotive Tester
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Clamp Meter
This Clamp Meter has been developed to determine indirectly, the the AC/DC currents with high accuracy. A non-contact clamp meter and a torch to illuminate the area being measured, have been integrated into this device. The small size of this  Clamp Meter, makes it possible to use in small spaces with limited access.

- 4 digit LCD display with backlighting
- save function
- DCA zero rest function
- current tester, non-contact
- integrated light to illuminate measured area
- automatic range selection
- automatic disconnect
- clamp diameter: 18 mm 

 

PCE-VE 320N is a car measuring device, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This car measuring device is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

- Diameter camera head: Ø 5.5 mm / 0.22"
- Cable length: 1 m / 3ft 3"
- Interface: mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

- Diameter: Ø2.8mm / 0.11"
- Cable length: 2m / 6.5 ft
- Camera direction: 0°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission