Technical Support

Technical advice

Monday - Friday
9 am - 5 pm ET

(561) 320-9162

2 Years Warrenty 2 Years Warrenty

2-Year Warranty

All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects

  1. You are here:
  2. Home
  3. Products for 'signal converter pce instruments current transformer pce lctb 50 30 50'
Clamp on Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate
US$ 1,264.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Current Signal Converter PCE-SCI-U
US$ 212.00
ex. VAT, ex. delivery costs
The current signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the current signal converter are completely galvanically isolated.

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
Details
Power Meter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Clamp Meter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Digital Multimeter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Power Analyzer PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
1-Phase Power Meter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 1-phase power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Turbidity Meter PCE-TUM 50
US$ 1,327.00
ex. VAT, ex. delivery costs
The turbidity meter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the turbidity meter and to check the quality of drinking water and waste water.

- Measurement method: ISO 7027 (90°)
- Measuring ranges: 0 ... 2000 NTU
                                   0 ... 500 EBC
                                   0 ... 9999 ASBC
- 3 measuring units
Turbidity calibration up to 7 points
Details
Current Clamp PCE-DC 50
US$ 303.00
ex. VAT, ex. delivery costs
Wireless
The current clamp PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the current clamp can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. 

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
Details
HVAC Meter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
PAT Tester / Portable Appliance Testing Equipment PCE-ITE 50
US$ 1,392.00
ex. VAT, ex. delivery costs
Wireless

The PCE-ITE 50 is a robust PAT Tester with a large 3.5" TFT color LCD display. The PAT Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.


- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

Details
Current Clamp PCE-830-1-ICA incl. ISO Calibration Certificate
US$ 3,788.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-830 Current Clamp is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Current Clamp also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Details
Voltmeter PCE-GPA 50-ICA incl. ISO Calibration Certificate
US$ 1,264.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Clamp Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate
US$ 1,264.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Power Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate
US$ 1,264.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Power Analyzer PCE-GPA 50-ICA incl. ISO Calibration Certificate
US$ 1,264.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Universal Signal Converter PCE-SCI-E
US$ 263.00
ex. VAT, ex. delivery costs
The universal signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

- Measuring range 0 ... 600 V AC/DC
- Active and passive output signal
- Display and keypad for configuration
- Frequency measurement
- DIN rail mounting
- Display
Details
Voltage Signal Converter PCE-SCI-E
US$ 263.00
ex. VAT, ex. delivery costs
The voltage signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

- Measuring range 0 ... 600 V AC/DC
- Active and passive output signal
- Display and keypad for configuration
- Frequency measurement
- DIN rail mounting
- Display
Details