- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC

The Anemometer PCE-WSAC 50-111 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-121 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-211 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-221 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-311 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-321 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The PCE-PFG force gage is a handy, digital measuring device for measuring tensile and compressive forces. The force gage offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

A strong wind is not esssential to use the PCE-WSAC 50-910 anemometer, as it has a measuring range of 0 to 110 mph. In addition to the actual wind speed, this versatile anemometer can display the average wind speed over the last two minutes and five minutes. The anemometer is suitable for numerous wind detection applications in outdoor industries, e.g. on construction sites.

- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 4...20 mA
- incl. ISO calibration certificate

The PCE-WSAC 50-920 anemometer shows the speed of the wind and also the average figure over the prior two minutes and five minutes. The smallest wind motion is detected by this accurate anemometer. The timber industry, the mining industry, and the construction industry are some examples of applicable wind monitoring application areas for the anemometer.

- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V
- incl. ISO calibration certificate

The hay probe thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay probe thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay probe thermometer proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

The PCE-PFG force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- incl. ISO-calibration certificate

PCE-WMM 50 is a wall-mounted CO2 analyzer that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable alarm thresholds
- 3- to 4-digit remote display (depends on range)