Products for 'magnetic stirrer pce instruments ph meter pce 228 msr100 incl magnetic stirrer pce msr 100'

US$ 6,572.00

ex. VAT, ex. delivery costs

The full HD microscope is used to zoom in on components, assemblies and many other items. The microscope is a reflected-light microscope with an enlargement of up to 206x.

- Magnification: 32x ... 206x
- Resolution: 1920 x 1080 pixels
- Autofocus
- HDMI output

Illuminometer PCE-LMD 100

US$ 4,923.00

ex. VAT, ex. delivery costs

The illuminometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The illuminometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
A in accordance with DIN 5032-7

- External sensor with multifunction button

- 8 GB measured value memory

Photometer PCE-LMD 100

US$ 4,923.00

ex. VAT, ex. delivery costs

The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
A in accordance with DIN 5032-7

- External sensor with multifunction button

- 8 GB measured value memory

Data Logger PCE-CPC 100

US$ 6,137.00

ex. VAT, ex. delivery costs

The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

Particle Counter PCE-CPC 100

US$ 6,137.00

ex. VAT, ex. delivery costs

The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

HVAC Meter PCE-VE 1500-60500

US$ 25,773.00

ex. VAT, ex. delivery costs

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø6mm / 0.23"
- Cable length: 5m / 16.4 ft
- Camera direction: 0°
- Resolution: 1MP
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100

US$ 6,593.00

ex. VAT, ex. delivery costs

The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs

- Resolution: 0.05 µs

- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks

- Includes a camera for measuring crack width

- Bandwidth: 1 to 500 kHz

- Display: 10.1" TFT touchscreen display

- Internal storage: 8 GB

Surface Testing - Gloss Meter PCE-IGM 100

US$ 3,202.00

ex. VAT, ex. delivery costs

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20° : 0 ... 1000 GU / 60° : 0 ... 1000 GU / 85° : 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

HVAC Meter PCE-VE 1500-22190

US$ 30,657.00

ex. VAT, ex. delivery costs

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

Gloss Meter PCE-IGM 100

US$ 3,202.00

ex. VAT, ex. delivery costs

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

NDT Test Instruments PCE-PGM 100-ICA incl. ISO calibration certificate

US$ 2,072.00

ex. VAT, ex. delivery costs

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

Radiation Detector PCE-LMD 100

US$ 4,923.00

ex. VAT, ex. delivery costs

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
A in accordance with DIN 5032-7

- External sensor with multifunction button

- 8 GB measured value memory

Environmental Tester PCE-LMD 100

US$ 4,923.00

ex. VAT, ex. delivery costs

The environmental tester is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental tester guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
A in accordance with DIN 5032-7

- External sensor with multifunction button

- 8 GB measured value memory

Air Quality Particle Counting PCE-CPC 100

US$ 6,137.00

ex. VAT, ex. delivery costs

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

HVAC Meter PCE-VE 1500-28200

US$ 26,393.00

ex. VAT, ex. delivery costs

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.8mm / 0.11"
- Cable length: 2m / 6.5 ft
- Camera direction: 0°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

NDT Tester - Gloss Meter PCE-IGM 100

US$ 3,202.00

ex. VAT, ex. delivery costs

A gloss meter is a tester for determining surface gloss. Thereby, with the gloss meter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

HVAC Meter PCE-VE 1500-60200

US$ 21,813.00

ex. VAT, ex. delivery costs

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Borescope camera cable length: 2 m / 6.5 ft
- Cable diameter: 6mm / 0.23"
- Direction of view of the camera frontal
- Camera resolution 1 million pixels
- Camera viewing angle 120°
- Focusing distance 10 … 100 mm / 0.39 … 3.9"
- Flexible camera head length 60 mm / 2.3"
- Radius at 90° bend 50 mm / 1.9"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

Airborne Particle-Counting Hygiene PCE-CPC 100

US$ 6,137.00

ex. VAT, ex. delivery costs

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the airborne particle-counting hygiene is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1