Air velocity meter with 4 ... 20 mA output. Air velocity meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the air velocity meter is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Anemometer with 4 ... 20 mA output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Climate Meter with 4 ... 20 mA output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental meter with 4 ... 20 mA output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental tester with 4 ... 20 mA output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Weather station with 4 ... 20 mA output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind measurer with 4 ... 20 mA output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind Speed Alarm / Wind Alarm Controller with 4 ... 20 mA output. Wind speed alarm / wind alarm controller for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind speed meter with 4 ... 20 mA output. Wind speed meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the wind speed meter is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Air flow meter with 0 ... 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Air flow meter with 0 ... 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Air velocity meter with 0 ... 10 V output. Air velocity meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Anemometer with 0 ... 10 V output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Climate meter with 0 ... 10 V output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental meter with 0 ... 10 V output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental tester with 0 ... 10 V output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Weather station with 0 ... 10 V output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind measurer with 0 ... 10 V output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes