PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

With this condition monitoring industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the industrial borescope consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

 
- Flash frequency: 5 ... 99999 rpm
- Accuracy: ±0.05% + 1 Digit
- Contact tachometer
- Stroboscope LED
- Temperature measurement:
  Type K, PT 1000, Infrared
- Incl. ISO calibration certificate
  (only for the tachometer function)

The environmental meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the environmental meter is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Power supply: 24 V DC
- Relay output and control output
- Handle and wall bracket
- Analog output signal
- incl. ISO Calibration Certificate

The decibel meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the decibel meter is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Power supply: 24 V DC
- Relay output and control output
- Handle and wall bracket
- Analog output signal
- incl. ISO Calibration Certificate

The SPL meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the SPL meter is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Power supply: 24 V DC
- Relay output and control output
- Handle and wall bracket
- Analog output signal
- incl. ISO Calibration Certificate

The noise meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the noise meter is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Power supply: 24 V DC
- Relay output and control output
- Handle and wall bracket
- Analog output signal
- incl. ISO Calibration Certificate

With this videoscope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the videoscope consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Relay output and control output
- Handle and wall holder
- Analog output signal
- Incl. ISO calibration

With this inspection camera, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the inspection camera consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this automotive tester, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the automotive tester consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this snake camera, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the snake camera consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

- Flash frequency: 50 ... 35000 FPM
- Accuracy: ±(0.05% of measured value + 2 Dgt)
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- with trigger input
- Incl. ISO calibration certificate

With this condition monitoring industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the industrial borescope consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

The sound level meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the sound level meter is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Power supply: 24 V DC
- Relay output and control output
- Handle and wall bracket
- Analog output signal
- incl. ISO Calibration Certificate