Products for 'humidity detector pce instruments humidity detector pce rcm 11'

US$ 6,593.00

ex. VAT, ex. delivery costs

The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

- Units: bar, psi, MPa, l/min, m³/h, cfm

- Leak detection in compressed air, refrigerant
and gas systems

- Leakage assessment

- Various attachments

- Wireless headphones

- Frequency: 38 . .. 42 kHz

- Measurement rate: 1 Hz

- Memory capacity: 1 GB

Humidity Detector PCE-MA 110-ICA Incl. ISO Calibration Certificate

US$ 1,373.00

ex. VAT, ex. delivery costs

The humidity detector is an absolute moisture meter or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The humidity detector uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the absolute moisture meter can be performed at any time using the automatic calibration function and the included 100 g weight.

- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- Incl. ISO calibration certificate

Humidity Detector PCE-EMD 10-ICA Incl. ISO Calibration Certificate

US$ 1,319.00

ex. VAT, ex. delivery costs

The humidity detector can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 ... 122.0 °F and the humidity measuring range is 0.0 ... 99.9% RH.

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate

Humidity Detector PCE-RCM 10

US$ 277.00

ex. VAT, ex. delivery costs

The humidity detector is a portable handheld Dust Monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this Dust Monitor also measures air temperature and relative humidity (RH).

- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: -20 ... +70 °C / -4 ... +158 °F
- Humidity measuring range: 0 ... 100 % RH
- 2.4" full-color LCD with user-friendly graphics
- For indicative measurements

Humidity Detector PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,128.00

ex. VAT, ex. delivery costs

The humidity detector is an ideal measuring device for monitoring the air quality at workplaces. The humidity detector is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Humidity Detector PCE-WMT 200

US$ 726.00

ex. VAT, ex. delivery costs

With the Bluetooth humidity detector, up to 44 different types of wood can be checked for their moisture content. These include 36 hardwoods and 8 softwoods, such as beech, spruce, pine and maple, etc.

- 44 different types of wood
- Ramming electrode with pairs of needles
- Up to 150% moisture
- Bluetooth 4.0 interface

Flaw Detector PCE-FD 20

US$ 6,071.00

ex. VAT, ex. delivery costs

PCE-FD 20 is a portable ultrasonic flaw detector with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based flaw detector uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s

Gas Leak Detector PCE-LDC 20

US$ 6,593.00

ex. VAT, ex. delivery costs

The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

- Units: bar, psi, MPa, l/min, m³/h, cfm

- Leak detection in compressed air, refrigerant
and gas systems

- Leakage assessment

- Various attachments

- Wireless headphones

- Frequency: 38 . .. 42 kHz

- Measurement rate: 1 Hz

- Memory capacity: 1 GB

Leak Detector PCE-LDC 15

US$ 4,353.00

ex. VAT, ex. delivery costs

The leak detector is used in various areas of industry. For example, the leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones

Air Humidity Meter PCE-DPM 10

US$ 5,120.00

ex. VAT, ex. delivery costs

The air humidity meter from PCE Instruments enables precise determination of the dew point in pressurised systems. Thanks to its robust design, the device can be used for industrial applications up to 15 bar.

- Dew point measuring range from -100 ... +50 °C

- Pressure range up to 15 bar differential pressure

- Data logger for up to 100 million measured values

- Adjustable alarm limits

- Touch LC display

Humidity Detector PCE-WB 20SD

US$ 731.00

ex. VAT, ex. delivery costs

The data-logging humidity detector is used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data-recording humidity detector is an ideal tool for evaluating heat stress risks in different work environments.

- Programmable WBGT alarm setting with audible and visual alerts
- Manual (push-button) or automatic (adjustable 1 ... 3600 sec) sampling
- SD card memory (1 ... 16 GB) allows for quick and easy data transfer to a PC

Humidity Detector for Wood PCE-WMH 3

US$ 843.00

ex. VAT, ex. delivery costs

PCE-WMH-3 is a portable handheld digital humidity detector used to measure the moisture content of wood. This hammer-style humidity detector features preset characteristic curves for measuring moisture in 270 different wood types.

- Measuring range: 6 ... 60 % moisture content
- Accuracy: ±1 % (within 6 ... 12 % range), ±2 % (13 ... 28 %), ±2 % (29 ... 60 %)
- Resolution: 0.1 %

Gas Detector PCE-LDC 15

US$ 4,353.00

ex. VAT, ex. delivery costs

The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones

Air Humidity Meter PCE-DPM 10-SFKIT incl. Smart Features

US$ 5,438.00

ex. VAT, ex. delivery costs

- Dew point measuring range from -100 ... +50 °C

- Pressure range up to 15 bar differential pressure

- Data logger for up to 100 million measured values

- Adjustable alarm limits

- Touch LC display

- Smart features:

- Prediction of the final dew point value

- Camera function

- PDF report function in accordance with ISO 8573-1

Humidity Detector PCE-PMI 4

US$ 632.00

ex. VAT, ex. delivery costs

The humidity detector is a measuring device for nondestructive moisture measurement on concrete and screed. Here, the spring electrodes of the humidity detector are pressed onto the surface to be tested. Within seconds, the humidity detector will show the moisture content to the operator.

- Relative scale: 0 ... 100%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measuring the moisture in concrete and screed
- Numeric and graphical view
- Eight spring electrodes are used for the measurement

Humidity Detector PCE-AQD 10

US$ 591.00

ex. VAT, ex. delivery costs

The humidity detector is used to measure air quality. The humidity detector measures carbon dioxide, temperature and humidity. The CO2 sensor of the humidity detector is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity

Gas Leak Detector PCE-LDC 15

US$ 4,353.00

ex. VAT, ex. delivery costs

The gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones

Radiation Detector PCE-LMD 100

US$ 4,923.00

ex. VAT, ex. delivery costs

The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
A in accordance with DIN 5032-7

- External sensor with multifunction button

- 8 GB measured value memory