The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. Intrinsically safe, the Triple Plus+ provides enhanced features for safety and detector fleet managers including:

- Selection of flammable gas correction factors (so one unit can be used in
  several locations across a site)
- Annotation of the data file with user names and site names selected from
  pre-configured files in the unit

* Call to order or see accessories tab. Must specify sensors (see chart for details) and choose with / without internal pump. Charger and software sold separately.

 

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 ... 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen sulfide, H₂S, 0 ... 25 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Flamgard-Plus gas detector is a robust, flame-proof gas sensor for highly flammable gases. The Flamgard-Plus gas detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of integrated catalyst beads.

- Different versions available
- Flame-proof construction with ATEX approval
- Measurement with catalyst beads
- 3-wire 4 ... 20 mA output

The Xgard Type 5 gas detector is a robust, explosion-proof gas sensor for flammable gases. The Xgard Type 5 gas detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective flammable gases with the help of an integrated pellistor.
 
- Different versions available
- Explosion-proof construction with ATEX approval
- Detection by pellistor
- 3-wire 4 ... 20 mA output

The gas detector IRmax is a robust gas sensor for flammable gases. The gas detector IRmax is delivered ready-calibrated for 1 of 21 different configurations. Of course, the gas detector has ATEX approval and can also be used in potentially explosive areas.

- Calibrated for 1 of 21 different configurations
- ATEX approval
- Very reliable, even under the toughest conditions
- Low maintenance and energy saving

Single-Gas Gas Detector warning for gases (for Carbon Dioxide CO₂), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Carbon Dioxide CO₂
- Additional display and alarm station
- ATEX approved

 

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function

The Xsafe gas leak detector is a robust gas sensor for flammable gases in the safe range. The Xsafe gas leak detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective flammable gases with the help of an integrated pellistor.

- Different versions available
- For use in safe areas
- Detection by pellistor
- 3-wire 4 ... 20 mA or mV output

The Gas Leak Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NH₃ (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

This gas detector Gas-Pro-1 can gauge with its sensors a maximum of four different gases. Because of this versatility, the gas detector Gas-Pro-1 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

- Purpose: Personal protection
- Sensor type: CO / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

 

The TXgard-Plus gas detector is a robust, flame-proof gas sensor for toxic gases or oxygen. The TXgard-Plus gas detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of an integrated, electrochemical detector.

- Different versions available
- Flame-proof construction with ATEX approval
- Electrochemical detector
- 3-wire 4 ... 20 mA output

The Gas Leak Detector Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For PH₃ (Phosphine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

 

The Gas Leak Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement.

- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery