- Measuring range: 0 ... 20 N, 0 ... 4.5 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

PCE-CS 3000N is a digital rechargeable battery-powered heavy-duty Force Gauge that displays measurement values in kilograms (kg) or pounds (lbs). The Force Gauge comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.

- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg / 1.1 lbs
- Tare range: 100 % full scale 
- Includes hook, shackle, and remote control

 

A force gauge is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the force gauge on a scale in Newtons.

- Measuring range: 0… 25,000 N / 5,620 lbs
- Resolution: 1000 N / 224.8 lbs
- Measuring accuracy: ±1.95% f. R.
- with 100 cm hydraulic hose
- External analogue display
- Incl. ISO calibration certificate

- Measuring range: 0… 10,000 N / 2,248 lbs
- Resolution: 200 N / 45 lbs
- Measuring accuracy: ±1.95% f. R.
- Incl. ISO calibration certificate

- Measuring range: 0… 1,000 N / 225 lbs
- Resolution: 20 N / 4.5 lbs
- Measuring accuracy: ±2.5% of the measuring range
- Incl. ISO calibration certificate

- Measuring range: 0… 10,000 N / 2,248 lbs
- Resolution: 200 N / 45 lbs
- Measuring accuracy: ±1.95% f. R.

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

- Measuring range: 0… 2,500 N / 562 lbs
- Resolution: 100 N / 22.5 lbs
- Measuring accuracy: ±1.95% f. R.

- Measuring range: 0… 10,000 N / 2,248 lbs
- Resolution: 200 N / 45 lbs
- Measuring accuracy: ±1.95% f. R.

- Measuring range: 0… 1,000 N / 225 lbs
- Resolution: 20 N / 4.5 lbs
- Measuring accuracy: ±2.5% of the measuring range

A hydraulic force gauges is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the hydraulic force gauges on a scale in Newtons.

- Measuring range: 0… 25,000 N / 5,620 lbs
- Resolution: 1000 N / 224.8 lbs
- Measuring accuracy: ±1.95% f. R.
- with 100 cm hydraulic hose
- External analogue display

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 50,000 kg / 500 kN / 110,231 lb
- Resolution: 20 kg / 200 N / 44 lb
- Minimum load: 400 kg / 881 lb
- Supplied with remote control indicator

This force gauge is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand.

- Measuring range: 0.5 ... 50 N / 0.1 ... 11 lbs
- Resolution: 0.01 N / 0.002 lbs
- Evaluation via USB interface
- Different shaped measuring adapters
- Device for mounting on test stands
- incl. ISO Calibration Certificate

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 25 cm / 9,8 in

The PCE-FM 500N-ICA force gauge is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gauge is easily readable by the large numbers. The force gauge is equipped with an internal load cell for tensile and compression tests.

- Measuring range: 5... 500 N / 1.1 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Different shaped measuring adapters
- Evaluation via USB interface
- Device for mounting on test stands
- incl. ISO Calibration Certificate

The Test Stand measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our Test Stands.

Dynamometer PCE-DFG N 5K
- Measuring range: 0 ... 5000 N / 500 kg / 1100 lbs
- Resolution: 1N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Test Stand PCE-MTS500
- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel path: max. 300 mm / 11.8"
- Feed speed: 30 mm/min ... 230 mm/min / 1.18 ... 9.05 in/min