Products for 'force gauge digital force gauge pesola force gauge 1000g'

US$ 904.00

ex. VAT, ex. delivery costs

The force gauge is suitable for panel mounting. This force gauge can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gauge.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display

Force Gauge PCE-DFG NF 0.5K-ICA incl. ISO Calibration Certificate

US$ 1,769.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 0.5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs

- Resolution: 0.05 N / 0.01 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG NF 5K-ICA incl. ISO Calibration Certificate

US$ 1,769.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs

- Resolution: 0.5 N / 0.1 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DDM 3WI-ICA incl. ISO Calibration Certificate

US$ 1,526.00

ex. VAT, ex. delivery costs

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied without remote control indicator
- incl. ISO Calibration Certificate

Test Stand for Force Gauge PCE-MTS500 NL

US$ 4,158.00

ex. VAT, ex. delivery costs

The PCE-MTS500 NL is a motorized material test stand for use with the following: PCE-FB, PCE-FM, PCE-PTR, PCE-DFG and PCE-LFG Series. The motorized material test stand offers enhanced control and stability during material testing. It also helps to ensure the accuracy and repeatability of tension and compression force test results.

- Force capacity of 5000 N / 500 kg / 1100 pounds
- Automatic or manual (push-button) operation
- Adjustable velocity, traverse and feed rate
- AC power connection (110 V or 220 V)
- Heavy duty steel design

*** The mounting plate ADP-UNI must be ordered for internal load cell force gauges!***

Test Stand for Force Gauge PCE-MTS500 NL

US$ 4,158.00

ex. VAT, ex. delivery costs

Force Gauge PCE-DFG N 5K-ICA incl. ISO Calibration Certificate

US$ 1,676.00

ex. VAT, ex. delivery costs

The force gauge PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG N 2.5K-ICA incl. ISO Calibration Certificate

US$ 1,637.00

ex. VAT, ex. delivery costs

The PCE-DFG N 2.5K-ICA force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch.

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG N 1K-ICA incl. ISO Calibration Certificate

US$ 1,637.00

ex. VAT, ex. delivery costs

The PCE-DFG N 1K-ICA force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG 1000 X

US$ 1,093.00

ex. VAT, ex. delivery costs

The force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

- Measuring range: 0 ... 1000 N

- Resolution: 0.5 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Force Gauge PCE-DFG 500 X

US$ 1,055.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 500 N

- Resolution: 0.1 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Force Gauge PCE-DFG 5 X

US$ 1,036.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 5 N

- Resolution: 0.001 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7,200 Hz

Force Gauge PCE-DFG 20 X

US$ 1,036.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 20 N

- Resolution: 0.01 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Force Gauge PCE-DFG 200 X

US$ 1,036.00

ex. VAT, ex. delivery costs

The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces up to 200 N.

- Measuring range: 0 ... 200 N

- Resolution: 0.1 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Force Gauge PCE-DFG 10 X

US$ 1,036.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 10 N

- Resolution: 0.005 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7,200 Hz

Force Gauge PCE-N45F

US$ 660.00

ex. VAT, ex. delivery costs

The force gauge is used to realize individual weighing solutions. The force gauge can be used to connect load cells, force sensors, weighing platforms and other sensors that use strain gauges.

- Signal input range: 0 ... 10 mV / 0 ... 15 mV
- Supply voltage of the measuring cell: 5V
- Power supply: 24V DC
- Relay output
- Potential-free digital input
- Interface and analog output

Force Gauge PCE-DFG N 500-ICA incl. ISO Calibration Certificate

US$ 1,275.00

ex. VAT, ex. delivery costs

Digital force gauge PCE-DFG N 500-ICA for tensile force measurement and pressure force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Force Gauge PCE-DFG N 10-ICA incl. ISO Calibration Certificate

US$ 1,254.00

ex. VAT, ex. delivery costs

The digital force gauge PCE-DFG N 10-ICA for tensile force measurement and force measurement up to 10 N. The force gauge is a digital dynamometer for precise measurements with a resolution of 0.005 N.

- Measuring range: 0 ... 10 N, 0 ... 2.25 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate