Products for 'flaw detector pce instruments flaw detector pce usc 20'

US$ 1,686.00

ex. VAT, ex. delivery costs

The radiation detector is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the radiation detector covers a large number of solar modules.

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems

Colorimeter PCE-CSM 20

US$ 6,963.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the colorimeter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The colorimeter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d

- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes

- USB cable and software for data transfer

- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Spectrophotometer PCE-CSM 20

US$ 6,963.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld spectrophotometer used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 20 offers a long battery life, a 4-color lamp with long life and an easy-to-use portable design. The PCE-CSM 20 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d

- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes

- USB cable and software for data transfer

- 2000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Humidity Detector PCE-DPM 3

US$ 1,359.00

ex. VAT, ex. delivery costs

The humidity detector PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This humidity detector measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function

IoT Meter PCE-CSM 20

US$ 6,963.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld IoT meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the IoT meter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The IoT meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d

- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes

- USB cable and software for data transfer

- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Color Meter PCE-CSM 20

US$ 6,963.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld color meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the color meter offers a long battery life, 4-color lamp and an easy-to-use portable design. The color meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d

- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes

- USB cable for data transfer

- 2000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50

- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB

NDT Test Instruments PCE-UCD 100

US$ 6,593.00

ex. VAT, ex. delivery costs

The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs

- Resolution: 0.05 µs

- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks

- Includes a camera for measuring crack width

- Bandwidth: 1 to 500 kHz

- Display: 10.1" TFT touchscreen display

- Internal storage: 8 GB

Humidity Detector PCE-MA 100

US$ 1,511.00

ex. VAT, ex. delivery costs

The humidity detector allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the humdity detector dries the material to be weighed, and then calculates the moisture content from the weight difference.

- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Radiation Detector PCE-MFM 4000

US$ 1,444.00

ex. VAT, ex. delivery costs

The radiation detector is used in the laboratory and quality assurance to measure the strength of magnetic fields. The radiation detector is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

- Tabletop device with 2 sensors

General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable (mG / µT)

- Data storage on SD memory card

Material Tester for Metals PCE-COM 20

US$ 7,755.00

ex. VAT, ex. delivery costs

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Handheld Humidity Detector PCE-WM1

US$ 1,346.00

ex. VAT, ex. delivery costs

PCE-WM1 is a multi-function handheld humidity detector used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.

- Temperature range: -20 ... 80°C
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

Humidity Detector PCE-MA 110TS

US$ 1,380.00

ex. VAT, ex. delivery costs

The humidity detector has a moisture measuring range of 0 … 100%. The humidity detector is operated via the 5" touchscreen. To determine the moisture content with the humidity detector, a sample is evenly distributed on the sample pan.

- Measuring range: 0 ... 110 g / 0 ... 3.88 oz
- Resolution: 0.001 g
- Memory for 32 drying parameters
- 5" touch screen for easy operation
- RS-232 interface for connection to a PC

Radiation Detector Kit PCE-PVA 100-SPM 1-KIT

US$ 2,046.00

ex. VAT, ex. delivery costs

The radiation detector kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Radiation detector PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Radiation detector PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems

Gas Leak Detector PCE-LDC 8

US$ 2,145.00

ex. VAT, ex. delivery costs

The Gas Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Gas Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound

- Measuring principle: air, coolant, non-explosive gases

- Working frequency of 40 kHz

- up to 6 h battery operation

- Leak detection via headphones and LCD display

- Localize leaks up to 18m, 59 ft.

Ultrasonic Leak Detector PCE-LDC 8

US$ 2,145.00

ex. VAT, ex. delivery costs

The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound

- Measuring principle: air, coolant, non-explosive gases

- Working frequency of 40 kHz

- up to 6 h battery operation

- Leak detection via headphones and LCD display

- Localize leaks up to 18m, 59 ft.

Humidity Detector PCE-WT1N

US$ 1,092.00

ex. VAT, ex. delivery costs

The humidity detector is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The humidity detector determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

- Fast moisture control
- Electrical resistance methods
- For biomasses such as straw, hay, sawdust, etc.
- Sample size up to approx. 120 cm³

Humidity Detector PCE-DPM 3-ICA

US$ 1,513.00

ex. VAT, ex. delivery costs

The humidity detector is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This humidity detector measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Radiation Detector PCE-PVA 100-ICA incl. ISO Calibration Certificate

US$ 1,979.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems
- incl. ISO Calibration Certificate