Products for 'electrical tester pce instruments electrical tester pce hdm 7'

US$ 480.00

ex. VAT, ex. delivery costs

The electrical tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the electrical tester is inductive. To do this, the supply line is placed in the electrical tester.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

Electrical Tester PCE-IT100

US$ 355.00

ex. VAT, ex. delivery costs

The electrical tester PCE-IT100 detects with auxiliary voltages of 125V, 250V, 500V and 1000V insulation resistors up to max. 4000 MΩ. Furthermore, the measurement of low-resistance resistors up to 400 Ω and a measurement function for alternating and also DC voltages is offered by this electrical tester.

- AC voltage (40 ... 400 Hz): 750V
- DC voltage: 1000V
- Resistance: 40 Ω / 400 Ω
- Insulation resistance: 4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ
- 4 different test voltages up to 1 kV
- Auto power-off function
- Safety: EN 61010-1, CAT III 1000V

Melt Flow Tester PCE-MFI 400-US

US$ 9,860.00

ex. VAT, ex. delivery costs

The material flow tester is used for rapid testing of the melt mass flow rate of plastics. The material flow tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000

NDT Tester Inspection Camera PCE-PIC 60

US$ 16,623.00

ex. VAT, ex. delivery costs

The NDT tester inspection camera PCE-PIC 60 is used to inspect channels and pipes. The NDT tester inspection camera has a fiber optic push cable of 60 m. At the end of the NDT tester inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley

Material Tester for Metals PCE-COM 20

US$ 7,755.00

ex. VAT, ex. delivery costs

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Conductivity Tester for Metals PCE-COM 20

US$ 7,755.00

ex. VAT, ex. delivery costs

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Electrical Tester PCE-MCM 10-ICA incl. ISO Calibration Certificate

US$ 581.00

ex. VAT, ex. delivery costs

The electrical tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the electrical tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the electrical tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable electrical tester with 1 m / 3.3 ft cable

- Incl. ISO Calibration Certificate

Electrical Tester PCE-MCM 10

US$ 376.00

ex. VAT, ex. delivery costs

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable electrical tester with 1 m / 3.3 ft cable

Electrical Tester PCE-123-ICA incl. ISO Calibration Certificate

US$ 924.00

ex. VAT, ex. delivery costs

PCE-123 is a electrical tester used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use electrical tester provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the electrical tester useful in a wide range of applications.

- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Electric Vehicle EVSE Tester PCE-EVSE 310+

US$ 482.00

ex. VAT, ex. delivery costs

The electric vehicle EVSE tester is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

Electric Vehicle EVSE Tester PCE-EVSE 310

US$ 482.00

ex. VAT, ex. delivery costs

- PE pre-test

- Proximity Pilot PP / Control Pilot CP

- Simulation CP fault "E" / PE fault

- Mains socket for measuring purposes

- Safety measuring sockets

- Optional adapter to type 1

Clamp on Tester PCE-PA 8500

US$ 4,326.00

ex. VAT, ex. delivery costs

The clamp on tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp on tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

Electric Vehicle EVSE Tester PCE-EVSE 300

US$ 430.00

ex. VAT, ex. delivery costs

Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special electric vehicle EV tester are required to check the function, the protective devices and the insulation.

- CP and PP simulation
- Direct connection for wallboxes
- Adapter with charging plugs Type 1 and Type 2
- CP simulation (communication line) A, B, C, D, error

Electrical Tester PCE-IT55

US$ 288.00

ex. VAT, ex. delivery costs

Electrical Tester for insulation resistance up to 2000 MΩ

- Measuring ranges AC voltage: 0 ... 750V
- Resolution AC voltage: 1V
- Accuracy AC voltage: ± 1.2% ± 10 dgts
- Complies with IEC1010-1, CAT III 1000V
- Large display with backlight
- Individual measurement and duration measurement

Electrical Tester PCE-CTI 10-ICA incl. ISO Calibration Certificate

US$ 571.00

ex. VAT, ex. delivery costs

Automotive Tester PCE-VE 900N4 1.2 m / 4-way-head / Ø 2 mm

US$ 14,801.00

ex. VAT, ex. delivery costs

The automotive tester has a 1.2 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this automotive tester. The camera head of this automotive tester can move freely in 4 directions.

- Cable / head diameter: 2 mm
- Direction of movement camera head: 4-way
- Camera head length: 7 mm
- Bending radius: 6 mm
- 1.2 m / 3.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP58 camera cable
- 400 x 400 pixel image resolution

Material Flow Index Tester / Plastometer PCE-MFI 400-US

US$ 9,860.00

ex. VAT, ex. delivery costs

The material flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow index tester device is designed for both incoming goods inspection and continuous production monitoring.

Electrical Tester PCE-BMM 10-ICA incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

This PCE-BMM 10 electrical tester is equipped for mobile as well as stationary operation. The electrical tester can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.

- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
- incl. ISO Calibration Certificate