Products for 'current clamp chauvin arnoux gmbh current clamp ca d35n'

Clamp Meter PCE-CTI 10-ICA incl. ISO Calibration Certificate

US$ 571.00

ex. VAT, ex. delivery costs

The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
- incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ SM-ICA incl. ISO-Calibration Certrificate

US$ 5,037.00

ex. VAT, ex. delivery costs

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm, DN 15 ... 100 / 20 ... 108 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certrificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200 SML-ICA incl. ISO-Calibration Certificate

US$ 4,620.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters DN 20-108 mm / 50-700 mm / 315-6000 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ MR incl. ISO Calibration Certificate

US$ 4,694.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate

US$ 4,509.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ L-ICA incl. ISO Calibration Certificate

US$ 4,395.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certifikcate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ M-ICA incl. ISO Calibration Certificate

US$ 4,263.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S-ICA incl. ISO-Calibration Certificate

US$ 4,263.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 15 ... 100 / 20 ... 108 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp on Meter PCE-DC 50-ICA incl. ISO Calibration Certificate

US$ 466.00

ex. VAT, ex. delivery costs

The Clamp on Meter PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the Clamp on Meter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate

Clamp on Meter PCE-CM 40-ICA incl. ISO Calibration Certificate

US$ 356.00

ex. VAT, ex. delivery costs

The flexible digital Clamp on Meter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible Clamp on Meter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200 ML-ICA incl. ISO-Calibration Certificate

US$ 3,889.00

ex. VAT, ex. delivery costs

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0,001 m/s

- incl. sensor set

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm, DN 300 ... 6000

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200 SL-ICA incl. ISO-Calibration Certificate

US$ 3,889.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm, DN 300 ... 6000 mm

- for different media

- for different pipe materials

- measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp Meter PCE-CM 40-ICA incl. ISO Calibration Certificate

US$ 356.00

ex. VAT, ex. delivery costs

The flexible digital clamp meter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible clamp meter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate

Clamp Meter PCE-DC 50-ICA incl. ISO Calibration Certificate

US$ 466.00

ex. VAT, ex. delivery costs

The clamp meter PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the clamp meter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S

US$ 3,886.00

ex. VAT, ex. delivery costs

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the

ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 15 ... 100 / 20 ... 108 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity,
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery

Clamp on Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Clamp on Tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp on Tester captures these currents and displays them on the display.

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate

Clamp Meter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Clamp Meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp Meter captures these currents and displays them on the display.

Clamp on Tester PCE-DC 20-ICA incl. ISO Calibration Certificate

US$ 343.00

ex. VAT, ex. delivery costs

The AC/DC clamp on tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC clamp on tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate