A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.
- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
With the PCE-890U-ICA Condition Monitoring Infrared Thermometer, measurements of surface temperatures can be carried out quickly and easily. Since the infrared thermometer uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The infrared thermometer makes it easy to measure objects from a distance that are difficult to access.
- Measuring range: -50 ... 1150°C / -58 ... 2102°F
- Accuracy: ± 1.5% ± 2°C / 3.6°F (0 ... 500°C / 32 ... 932°F)
- Resolution: 0.1°C / 0.18°F (<1000°C)
- Emission level: 0.1 ... 1
- incl. ISO Calibration Certificate
The PCE-JR-911 Non-Contact Food Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Non-Contact Food Thermometer comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.
- Temperature range: -40 to 500°C / -40 ... 932°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ±2% of reading or ±2°C / 3.6°F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD
- Wall Mount Particle Counter
- 6 channel measuring range 0.3(fixed) 0.4-25
um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at
> 0.75 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS
209E
- Mass concentration mode (PM 2.5, PM
10)
- Ethernet, USB, Touch Screen display, Audible
Alarms & Wifi Optional
- Incl. calibration certificate
traceable to NIST ISO 21501-4 and JIS B9921
- Made in the USA
- Wall Mount Particle Counter
- 6 channel measuring range 0.5(fixed) 0.6-25
um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at
> 0.75 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS
209E
- Mass concentration mode (PM 2.5, PM
10)
- Ethernet, USB, Touch Screen display, Audible
Alarms & Wifi Optional
- Incl. calibration certificate
traceable to NIST ISO 21501-4 and JIS B9921
- Made in the USA
The data-logging condition monitoring device is used to determine volume. The PCE-NDL 10 data-logging condition monitoring device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging condition monitoring device has an SD card slot that enables the use of an SD card as an additional storage medium.
- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement