Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function
- Data logger

 

The TXgard-Plus oxygen meter is a robust, flame-proof gas sensor for toxic gases or oxygen. The TXgard-Plus oxygen meter is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of an integrated, electrochemical detector.

- Different versions available
- Flame-proof construction with ATEX approval
- Electrochemical detector
- 3-wire 4 ... 20 mA output

The temperature data logger has a measuring range of -80 … +70 °C. The temperature data logger is therefore suitable for monitoring particularly cold environments.

- Measuring range: -80 ... +70 °C / -112 ... +158 °F
- Measurement accuracy: ± 0.5 °C (-30 ... +70 °C / -22 ... +158 °F)
- Resolution: 0.1 °C
- USB data logger for dry ice
- Data export directly as PDF

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

The temperature data logger has a measuring range of -80 … +70 °C. The temperature data logger is therefore suitable for monitoring particularly cold environments.

- Measuring range: -80 ... +70 °C / -112 ... +158 °F
- Measurement accuracy: ± 0.5 °C (-30 ... +70 °C / -22 ... +158 °F)
- Resolution: 0.1 °C
- USB data logger for dry ice
- Data export directly as PDF

The Formaldehyde Meter AQ-300 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air. You can buy the Formaldehyde Meter AQ-300 Set EF here in our online shop.

- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Alarm function: "High", "Low", Mute
- Alarm output: Transistor output, 150-mA max
- Low Alarm, High Alarm & Control
- Analog output: 0... 5V
- Location ID: Storage of the measuring location

The TXgard-Plus gas detector is a robust, flame-proof gas sensor for toxic gases or oxygen. The TXgard-Plus gas detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of an integrated, electrochemical detector.

- Different versions available
- Flame-proof construction with ATEX approval
- Electrochemical detector
- 3-wire 4 ... 20 mA output

The Xgard-1-NH3 is a single-gas Gas Leak Detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

- Single-use Gas Leak Detector for CO
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 300 ppm

 

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)
- Alarm function

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

- Borescope camera cable length: 2 m / 6.5 ft
- Cable diameter: 6mm / 0.23"
- Direction of view of the camera frontal
- Camera resolution 1 million pixels
- Camera viewing angle 120°
- Focusing distance 10 … 100 mm / 0.39 … 3.9"
- Flexible camera head length 60 mm / 2.3"
- Radius at 90° bend 50 mm / 1.9"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / triple alarm-signaling / no service or calibration necessary / self-testing function / CO, H2S or O2.

- Single-use Gas Leak Detector for O₂
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 30 % Vol.

 

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function

The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval