Ultrasonic Flow Meter PCE-TDS 200 SL-ICA incl. ISO-Calibration Certificate
US$ 3,889.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- incl. 4 sensors
Pipe size:
  DN
 15 ... 100 / 20 ... 108 mm,
  DN 300 ... 6000 mm
- for different media
- for different pipe materials
- measuring parameters: Flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
- incl. ISO-Calibration Certificate
Portable Ultrasonic Flow Meter PCE-TDS 200 S
US$ 2,640.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
Air Quality Station PCE-WSAC 50-321
US$ 653.00
ex. VAT, ex. delivery costs
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Air Quality Station PCE-WSAC 50-211
US$ 653.00
ex. VAT, ex. delivery costs
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Air Quality Station PCE-WSAC 50-311
US$ 653.00
ex. VAT, ex. delivery costs
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Ultrasonic Flow Meter PCE-TDS 100HMHS-ICA incl. ISO Calibration Certificate
US$ 3,419.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the flow meter is quite simple.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
Pipe size: DN 50 … 720 mm / DN 20 …108 mm 
- Sensor temperature range:  32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-HM and TDS-HS on rails
- Incl. ISO Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200 SM-ICA incl. ISO-Calibration Certificate
US$ 3,716.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- incl. 4 sensors
Pipe size:
  DN
 50 ... 700 / 57 ... 720 mm,
  DN 15 ... 100 / 20 ... 108 mm
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
- incl. ISO-Calibration Certificate
Portable Ultrasonic Flow Meter PCE-TDS 200 ML
US$ 3,140.00
ex. VAT, ex. delivery costs
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0,001 m/s
- incl. sensor set
- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm, DN 300 ... 6000
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
Clamp-on Ultrasonic Flow Meter PCE-TDS 200 ML-ICA incl. ISO-Calibration Certificate
US$ 3,889.00
ex. VAT, ex. delivery costs
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0,001 m/s
- incl. sensor set
- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm, DN 300 ... 6000
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Wind Speed Meter PCE-WSAC 50W 24
US$ 1,571.00
ex. VAT, ex. delivery costs
The Wind Speed Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Portable Ultrasonic Flow Meter PCE-TDS 200 S
US$ 2,640.00
ex. VAT, ex. delivery costs
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameter: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
Ultrasonic Flow Meter PCE-TDS 75
US$ 2,059.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
Clamp-on Ultrasonic Flow Meter PCE-TDS 200 SL-ICA incl. ISO-Calibration Certificate
US$ 3,889.00
ex. VAT, ex. delivery costs
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- incl. 4 sensors
- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm, DN 300 ... 6000 mm
- for different media
- for different pipe materials
- measuring parameters: Flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
- incl. ISO-Calibration Certificate
Portable Ultrasonic Flow Meter PCE-TDS 200 SL
US$ 3,140.00
ex. VAT, ex. delivery costs
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- incl. 4 sensors
- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm, DN 300 ... 6000 mm
- for different media
- for different pipe materials
- measuring parameters: Flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
Wind Speed Meter PCE-WSAC 50W 230
US$ 1,571.00
ex. VAT, ex. delivery costs
The Wind Speed Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Ultrasonic Flow Meter PCE-TDS 200 S-ICA incl. ISO-Calibration Certificate
US$ 3,017.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 75
US$ 2,059.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1%
  (of the measured value)
Pipe size: DN 25 ... 1200 mm
- Interface: RS232 & RS485
- Relay output
Air Quality Station PCE-WSAC 50-120
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The Air Quality Station  can be used to monitor and alert on the current wind speed.

- Air Quality Station with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate