Products for 'Ultrasonic Flow Tester PCE TDS 100HSH incl. Thermometer '

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN20 / 3/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Tester PCE-UFM 25

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN25 / 1"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Tester PCE-UFM 4

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN4 / 1/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN4 / 1/8"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Tester PCE-UFM 8

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN8 / 1/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN8 / 1/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

PCE-TDS 200 SR SENSOR On Rail sensors for the Ultrasonic Flow Meter

US$ 752.00

ex. VAT, ex. delivery costs

Connected on-rail sensors for pipe sizes DN 15 ... 100 / 20 ... 108 mm. Both sensors are located on one rail to simplify the positioning of the sensors. For easier handling, there is a corresponding handle on the rail.

Magnets are located underneath the rails to enable it to hold on to pipes with a ferrous metal by itself.

- Pipe sizes: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
in order to match the sensor to the hand-held unit!

Ultrasonic / UCI Hardness Tester PCE-3000U

US$ 3,623.00

ex. VAT, ex. delivery costs

The UCI ultrasonic tester PCE-3000U can be used to quickly check the hardness of components even when they are installed. The device impresses with its large measuring range, easy handling, robust design and temperature resistance down to -20°C / -4°F.

- Measurement according to UCI method
- Testing of HRC, HRB, HV, HB, MPa
- Measuring direction 360 °
- Large LCD
- USB interface
- Incl. 50 N / 11.2 lbs UCI probe

HVAC Meter PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

Ultrasonic / UCI Hardness Tester PCE-3000UL

US$ 3,454.00

ex. VAT, ex. delivery costs

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- 2 probes for UCI and Leeb rebound testing

HVAC Meter PCE-TDS 100H

US$ 1,841.00

ex. VAT, ex. delivery costs

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow meter or HVAC meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1

Ultrasonic Leak Detector PCE-LDC 20

US$ 6,593.00

ex. VAT, ex. delivery costs

The ultrasonic leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

- Units: bar, psi, MPa, l/min, m³/h, cfm

- Leak detection in compressed air, refrigerant
and gas systems

- Leakage assessment

- Various attachments

- Wireless headphones

- Frequency: 38 . .. 42 kHz

- Measurement rate: 1 Hz

- Memory capacity: 1 GB

Ultrasonic Flow Meter PCE-UFM 10

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN10 / 3/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe size: DN 10 / 3/8"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Meter PCE-UFM 15

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe size: DN 15 / 1/2"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Meter PCE-UFM 20

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe size: DN 20 / 3/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Meter PCE-UFM 25

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe size: DN 5 / 1"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Meter PCE-UFM 4

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN4 / 1/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe size: DN 4 / 1/8"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Meter PCE-UFM 8

US$ 1,221.00

ex. VAT, ex. delivery costs

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN8 / 1/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe size: DN 8 / 1/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

PCE-TDS 200 M SENSOR for the Ultrasonic Flow Meter

US$ 414.00

ex. VAT, ex. delivery costs

Medium-sized sensor pair for pipe diameters DN 50 ... 700 / 57 ... 720 mm. Suitable for flow measurement on medium-sized pipes. With the built-in magnets on the sensors for the ultrasonic flow meter, they can be attached to ferrous pipes. Alternatively, the sensors can be mounted to the pipe with detachable cable ties. The temperature resistance is between -30 ... 160 °C.

- Pipe diameter: DN 50 ... 700 / 57 ... 720 mm / 1.9 ... 27.5 / 2.2 ... 28.3"
- Temperature resistance: -30 ... 160 °C / -22 ... 320 °F

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
in order to match the sensor to the hand-held unit!

Portable Ultrasonic Flow Meter PCE-UFM 20

US$ 1,221.00

ex. VAT, ex. delivery costs

With our portable ultrasonic flow meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Portable ultrasonic flow meter is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN20 / 3/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA