US$ 1,276.31
ex. VAT, ex. delivery costs
Monday - Friday
9 am - 5 pm ET
(561) 320-9162
2-Year Warranty
All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects
The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval
The humidity detector provides exceptionally accurate grain moisture measurement in real time. The humidity detector uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.
- Boasts a measurement range of 5% to 40% for moisture content during
continuous mass flow with an error of just ±0.5% from 5% to 18% grain
moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control
Single-Gas Gas Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).
- Stationary
- For Carbon Dioxide CO2
- Additional display and alarm station
- ATEX approved
PCE-WMM 50 is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.
- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable alarm thresholds
- 3- to 4-digit remote display (depends on range)
The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Gas Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.
- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm
Gas Leak Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.
- High accuracy and functionality
- Battery operation
- Alarm function
Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!
The Gas Leak Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.
- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm
The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 ... 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Hydrogen sulfide, H₂S, 0 ... 25 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Gas Detector Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.
- Non-rechargeable, 1-year battery
- For PH3 (Phosphine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm
The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 ... 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Hydrogen sulfide, H₂S, 0 ... 25 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval
The Gas Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.
- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery
