The stainless steel immersion pressure / fill level sensor is suitable for measuring the level in the process. The immersion probe is particularly suitable for level measurement of waste water, contaminated or highly viscous media.

• Nominal pressures up to 200 mH2O
• Accuracy ± 0.35% of the measuring range
• 39.5 mm diameter
• Suitable for drinking water production
• Ceramic sensor
• Suitable for dirty and viscous media
• Different configurations possible

The simple pressure sensor PCE-PS 420 can be used everywhere where simple pressure is to be measured. The measured pressure is provided as a 4 … 20 mA analog value on the pressure sensor.

• Max. 400 Bar (selectable)
• 4 … 20 mA output
• Media: non-corrosive gases and liquids
• Pressure: relative
• Diaphragm: Ceramics
• Accuracy class: 1

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.

• Measurement range: 0 … 100 %
• Temperature range: +5 … +80 °C  (+41 … +176 °F)

The compact HVACR tester is characterized by its rotatable housing and the display and the battery supply. Thus, the HVACR tester is ideal for mobile applications, such as test beds.

• Max. 250 bar / 3626 psi
• Rotatable 4.5 digit display
• Battery operation
• Media: gases, fuels and oils
• Pressure: relative
• Diaphragm: Ceramic
• Accuracy class: 0.5

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, … is continuously measurable.

• Stainless sensor rod (250 mm length)
• Lab analysis of your sample determines % error
• Measuring range: 0 … 100%
• Material temperature range: -0 … +80 °C  (+41 … +176 °F)
• Analog and digital signal output

The IoT sensor roughness tester is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

• Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
• Measurement accuracy: <± 10%
• Micro USB interface
• Bluetooth
• 3 different cut-off wavelengths
• Download free app from the Google Play Store

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.

• Measuring range: 0 … 100%
• The maximum permissible error (absolute): Lab analysis of your sample determines % error
• Temperature range: +5 … +80 °C  (+41 … +176 °F)
• Questionnaire starts evaluation process