Products for 'Pressure Gauge PCE DMM 50 '

US$ 1,156.00

ex. VAT, ex. delivery costs

The pressure meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 200 Pa. The pressure meter PCE-PDA 01L has many different pressure measuring functions.

- Measuring range: ± 200 Pa / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Pressure Gauge PCE-N30U

US$ 249.00

ex. VAT, ex. delivery costs

The pressure gauge can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the pressure gauge applicable in a wide range of applications. The measured values are shown on the large LED display of the pressure gauge.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

Force Gauge PCE-CSI 30-ICA incl. ISO Calibration Certificate

US$ 5,478.00

ex. VAT, ex. delivery costs

The force gauge for in-house weighing of up to 30 t. The force gauge has a large shackle on the top and a rotatable hook with a safety catch on the underside. The force gauge is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate

Inspection Camera PCE-VMM 50

US$ 1,821.00

ex. VAT, ex. delivery costs

The PCE-VMM 50 inspection camera is a video microscope with a large sample support surface of 380 x 225 mm / 15 x 8.9 in. This makes it possible to freely position even larger samples on the inspection camera.

- Magnification: 0.7 ... 4.5 times
- Eyepiece: 0.5 times
- Front lens: 2x
- Sample support surface of 380 x 225 mm / 15 x 8.9 in
- Incident light illumination (by LED)
- LCD monitor
- Removable LCD

Air Quality Particle Counting PCE-CPC 50

US$ 2,495.00

ex. VAT, ex. delivery costs

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air quality particle counting is performed by an internal pump.

- Particle concentration: 0.3 ... 10 μm

- Particle measurement channel sizes:

0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

- Output in particles/m³,

particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

Force Gauge PCE-DDM 20WI

US$ 2,929.00

ex. VAT, ex. delivery costs

The PCE-DDM 20WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

Force Gauge PCE-DFG NF 50K

US$ 2,224.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gauge or the load cell has several threaded holes on the underside, which enable a fixed installation.

- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs

- Resolution: 5 N / 1.1 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display

Pressure Gauge PCE-P01

US$ 198.00

ex. VAT, ex. delivery costs

The pressure gauge is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The pressure gauge is particularly suitable for the complete documentation of your measuring tasks.

- Measurement of differential pressure and relative pressure
- 11 selectable units: mbar, bar, psi, kPa, ...
- Measuring range from -140 to +140 mbar
- Min / max and average value display directly on the display
- USB interface

Pressure Meter PCE-PDA A100L

US$ 1,024.00

ex. VAT, ex. delivery costs

The pressure meter PCE-PDA A100L is suitable for the measurement of atmospheric pressure. This pressure meter records the pressure from absolute zero to 200 kPa. The pressure gauge can be used for many mobile applications in industry and crafts.

- Measuring range pressure: 0 ... 200 kPa absolute
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: < ± 0.5% of the measuring range
- USB interface
- Datalogger
- Different units

Pressure Meter PCE-PDA 1L

US$ 971.00

ex. VAT, ex. delivery costs

The pressure meter PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The pressure meter PCE-PDA 1L has many different pressure measuring functions.

- Measuring range: ± 2000 Pa / ± 0.29 psi / ± 0.02 bar
- Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Airborne Particle-Counting Hygiene PCE-CPC 50

US$ 2,495.00

ex. VAT, ex. delivery costs

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the airborne particle-counting hygiene is performed by an internal pump.

- Particle concentration: 0.3 ... 10 μm

- Particle measurement channel sizes:

0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

- Output in particles/m³,

particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

Force Gauge PCE-DDM 20WI-ICA incl. ISO Calibration Certificate

US$ 3,663.00

ex. VAT, ex. delivery costs

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied without remote control indicator
- incl. ISO Calibration Certificate

Force Gauge PCE-DFG NF 10K

US$ 2,224.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has several threaded holes on the underside, which enable a fixed installation.

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Force Gauge PCE-DFG NF 20K

US$ 2,224.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has several threaded holes on the underside, which enable a fixed installation.

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Durometer PCE-VTS 50-PFG 500-KIT incl. Test Stand

US$ 2,679.00

ex. VAT, ex. delivery costs

The Durometer incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

- Measuring range: 0 ... 500 N
- Resolution: 0.1 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Motorised Force Test Stand PCE-VTS 50
- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"

Universal Testing Machine PCE-HTS 50

US$ 2,196.00

ex. VAT, ex. delivery costs

The motorized tension-compression Universal Testing Machine is a motorized test station with a force range of up to 500 N. With the help of the horizontal Universal Testing Machine, it is possible to to carry out tension-compression tests.

- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"

Pressure Meter PCE-PDA 1000L

US$ 957.00

ex. VAT, ex. delivery costs

The relative pressure meter PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure meter in the range between -100 ... 2000 kPa. The relative pressure meter PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

- Measuring range pressure: -100 ... 2000 kPa relative / -14.5 ... 290 PSI
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

Motorized Force Gauge PCE-MTS500-FD 300 KIT

US$ 4,085.00

ex. VAT, ex. delivery costs

Our motorized force gauge can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force gauge offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***