- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

PCE-CT 50 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

 

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!

PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries. This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable). Please note: Pressure sensors are sold separately.

- Measuring range: 0 to 400 bar / 0 to 5801 psi, depending on sensor
- Measures system pressure in all media (e.g., gasses, liquids, etc.)
- Offers min, max and hold functionality

PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

PCE-FD 20 is a portable ultrasonic thickness gauges or ultrasonic wall thickness gauges with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based ultrasonic thickness gauges uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

The pressure gauge PCE-P15 with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

- Range: ± 1000mbar / ± 15 psi
- Resolution: 1mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device

The pressure gauge PCE-P30 with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

- Range: ± 2000mbar / ± 30 psi
- Resolution: 2mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device

The pressure gauge PCE-P30-ICA with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

- Range: ± 2000mbar / ± 30 psi
- Resolution: 2mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate

The pressure gauge PCE-P15-ICA with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

- Range: ± 1000mbar / ± 15 psi
- Resolution: 1mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate

The pressure gauge records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges
- Temperature: 0 ... 50 °C /  32 ... 122 °F
- Relative humidity: 10 ... 90% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar)
- Selectable pressure unit: hPa, mmHg and inHg
- Real-time data storage
- incl. ISO Calibration Certificate