Products for 'PCE-DFG X' | PCE Instruments

Tensile Tester PCE-DFG 50K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

The Tensile Tester with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tensile Tester or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 50 kN
resolution: 5 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge PCE-DFG N 20K

US$ 1,584.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG N 20K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

Measuring range: 0 … 20 kN / 20,000 N
Resolution: 0.002 kN / 2 N
Accuracy: ± 0.2% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Torque Meter PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate

US$ 2,359.00

ex. VAT, ex. delivery costs

The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 100 Nm / 73.76 ft-lb
Resolution: 0.1 Nm / 0.0738 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display
incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate

US$ 2,452.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 10 Nm / 7.38 ft-lb
Resolution: 0.005 Nm / 0.00369 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display
incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate

US$ 2,451.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 50 Nm / 36.88 ft-lb
Resolution: 0.01 Nm / 0.00738 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display
incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG 20K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 20 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gage PCE-DFG 50K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

measurement range: 0 ... 50 kN
resolution: 5 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 20K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

The Tension Dynamometer / Tension Load Cell with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tension Dynamometer / Tension Load Cell or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 20 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 50K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

measurement range: 0 ... 50 kN
resolution: 5 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gage PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate

US$ 2,359.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 100 Nm / 73.76 ft-lb
Resolution: 0.1 Nm / 0.0738 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display
incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 20K

US$ 1,584.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG N 20K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

Measuring range: 0 … 20 kN / 20,000 N
Resolution: 0.002 kN / 2 N
Accuracy: ± 0.2% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Force Gage PCE-DFG NF 0.5K

US$ 1,501.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

Measuring range: 0 … 0.5 kN / 500 N / 112 lbs
Resolution: 0.05 N / 0.01 lbs
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Force Gage PCE-DFG N 50K

US$ 1,584.00

ex. VAT, ex. delivery costs

The Force Gage PCE-DFG N 50K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

Measuring range: 0 … 50 kN / 50,000 N
Resolution: 5 N
Accuracy: ± 0.2% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Force Gauge / Digital Force Gauge PCE-DFG 20K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge / Digital Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 20 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 50K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

measurement range: 0 ... 50 kN
resolution: 5 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gage PCE-DFG NF 1K

US$ 1,501.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the underside that allow a firm installation.

Measuring range: 0 … 1 kN / 1,000 N / 225 lbs
Resolution: 0.1 N / 0.02 lbs
Accuracy: ±0.5 % of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Force Gage PCE-DFG NF 2K

US$ 1,501.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

Measuring range: 0 … 2 kN / 2,000 N / 450 lbs
Resolution: 0.2 N / 0.04 lbs
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Force Gage PCE-DFG NF 5K

US$ 1,501.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

Measuring range: 0 … 5 kN / 5,000 N / 1,124 lbs
Resolution: 0.5 N / 0.1 lbs
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display