Products for 'PCE-DFG X' | PCE Instruments

US$ 4,169.00

ex. VAT, ex. delivery costs

The Adhesion Tester is a compact bench-top meter with an integrated load cell for the precise measurement of forces within the range 0 ... 500 N. The Adhesion Tester was specially developed for peel tests and enables a comprehensive assessment of the processing quality.

measurement range: 0 ... 500 N
resolution: 0.1 N
accuracy: ±0.05 % FS
sampling rate: 2 ... 100 Hz
traverse speed: 100 mm/min, 300 mm/min
traverse distance: 150 mm
Measurable edge thickness: 0.4...3.5 mm
Measurable board thickness: 10...64 mm
graphical display
data logger

Force Gage PCE-DFG 10K XF

US$ 1,923.00

ex. VAT, ex. delivery costs

The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz

Tensile Tester PCE-DFG 10K XF

US$ 1,923.00

ex. VAT, ex. delivery costs

The Tensile Tester with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tensile Tester or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz

Force Gage PCE-DFG NF 10K-ICA incl. ISO Calibration Certificate

US$ 2,497.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 10K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.

Measuring range: 0 … 10 kN / 10,000 N / 2245 lbs
Resolution: 1 N / 0.22 lb
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display
Incl. ISO calibration certificate

Force Gage PCE-DFG NF 50K-ICA incl. ISO Calibration Certificate

US$ 2,497.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 50K-ICA with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.

Measuring range: 0 … 50 kN / 50,000 N / 11,240 lbs
Resolution: 5 N / 1.1 lbs
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display
Incl. ISO calibration certificate

Force Gauge PCE-DFG NF 10K-ICA incl. ISO Calibration Certificate

US$ 2,497.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 10K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has several threaded holes on the underside, which enable a fixed installation.

Measuring range: 0 … 10 kN / 10,000 N / 2245 lbs
Resolution: 1 N / 0.22 lb
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display
Incl. ISO calibration certificate

Force Gauge PCE-DFG NF 50K-ICA incl. ISO Calibration Certificate

US$ 2,497.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 50K-ICA with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gauge or the load cell has several threaded holes on the underside, which enable a fixed installation.

Measuring range: 0 … 50 kN / 50,000 N / 11,240 lbs
Resolution: 5 N / 1.1 lbs
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display
Incl. ISO calibration certificate

Tension Dynamometer PCE-DFG 10K XF

US$ 1,923.00

ex. VAT, ex. delivery costs

The Tension Dynamometer with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tension Dynamometer or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz

Force Gage PCE-DFG NF 20K-ICA incl. ISO Calibration Certificate

US$ 2,497.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 20K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.

Measuring range: 0 … 20 kN / 20,000 N / 4,500 lbs
Resolution: 2 N / 0.5 lbs
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display
Incl. ISO calibration certificate

Force Gauge PCE-DFG NF 20K-ICA incl. ISO Calibration Certificate

US$ 2,497.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG NF 20K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has several threaded holes on the underside, which enable a fixed installation.

Measuring range: 0 … 20 kN / 20,000 N / 4,500 lbs
Resolution: 2 N / 0.5 lbs
Accuracy: ± 0.5% of the measuring range
Memory for 100 measurements
USB interface
Graphic display
Incl. ISO calibration certificate

Force Gauge PCE-DFG 10K XF

US$ 1,923.00

ex. VAT, ex. delivery costs

The Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz

Force Gage PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate

US$ 2,451.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 5 Nm / 3.69 ft-lb
Resolution: 0.001 Nm / 0.00074 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display
incl. ISO Calibration Certificate for one direction (left or right)

Force Gauge PCE-DFG N 50K

US$ 1,584.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG N 50K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

Measuring range: 0 … 50 kN / 50,000 N
Resolution: 5 N
Accuracy: ± 0.2% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Tensile Tester PCE-DFG 20K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

measurement range: 0 ... 20 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 50K XF-ICA incl. ISO-Calibration Certificate

US$ 2,738.00

ex. VAT, ex. delivery costs

measurement range: 0 ... 50 kN
resolution: 5 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge PCE-DFG N 20K

US$ 1,584.00

ex. VAT, ex. delivery costs

The force gauge PCE-DFG N 20K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

Measuring range: 0 … 20 kN / 20,000 N
Resolution: 0.002 kN / 2 N
Accuracy: ± 0.2% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Torque Meter PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate

US$ 2,359.00

ex. VAT, ex. delivery costs

The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 100 Nm / 73.76 ft-lb
Resolution: 0.1 Nm / 0.0738 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display
incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate

US$ 2,452.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 10 Nm / 7.38 ft-lb
Resolution: 0.005 Nm / 0.00369 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display
incl. ISO Calibration Certificate for one direction (left or right)