With its hydrogen-selective sensor, the gas leak detector can detect the smallest leaks with a very low leak rate. Containers or lines that do not contain hydrogen can also be checked for leaks with the gas leak detector if they are filled with test gas containing hydrogen and then checked for leaks.

- High sensitivity: > 2 g / year
- Medium sensitivity: > 15 g / year
- Low sensitivity: > 30 g / year - bar display with traffic light function
- Three adjustable sensitivities
- Semi-rigid probe with a length of 40 cm / 15.7"
- Audible and visual alarm

This gas leak detector is a compact and reliable measuring device which serves to guarantee the safety of workers in companies. The gas leak detector has a lifespan of 2 years and is prepared for all environmental conditions that occur in industry.

- Measuring range sensor H2S: 0 ... 100 ppm
- Alarm 1: 5 ppm
- Alarm 2: 10 ppm
- Robust housing
- Self test function
- 24 months operating time / detection time

Single-Gas Gas Detector warning for gases (for Carbon Dioxide CO₂), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Carbon Dioxide CO₂
- Additional display and alarm station
- ATEX approved

 

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases

The gas leak detector is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The gas leak detector is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity

- Up to 15 gases
- For flammable gases
- 500 mm / 19.6" sensor
- Visual, audible and haptic alarm

PCE-WMM 50 is a wall-mounted gas leak detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable alarm thresholds
- 3- to 4-digit remote display (depends on range) 

 

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

This gas leak detector is designed as a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman gas leak detector is a single gas detector.

- Gas detector for flammable gases
- Range: 0...100%
- Alarm: 20%
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight: 130g / 4.5 oz
- incl. charger

The ultrasonic leak detector is used in various areas of industry. For example, the ultrasonic leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases

The Xgard-1-NO2 is a single-gas gas sensor used to warn for gases (Nitrogen dioxide, NO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Nitrogen dioxide, NO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (for CO2 only)

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-NH3 is a single-gas Gas detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Gas Detector AQ-300 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.

- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Alarm function: "High", "Low", Mute
- Alarm output: Transistor output, 150-mA max
- Low Alarm, High Alarm & Control
- Analog output: 0... 5V
- Location ID: Storage of the measuring location