Products for 'Force Gage PCE CSI 12 '

Force Gage PCE-DFG N 100K-ICA incl. ISO Calibration Certificate

US$ 2,186.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG N 100K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 100 kN / 100,000 N
- Resolution: 10 N
- Accuracy: ± 1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate

Force Gage PCE-DFG NF 10K-ICA incl. ISO Calibration Certificate

US$ 2,488.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 10K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-DFG NF 50K-ICA incl. ISO Calibration Certificate

US$ 2,488.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 50K-ICA with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.

- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs

- Resolution: 5 N / 1.1 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display

- Incl. ISO calibration certificate

Force Gage PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Device Clamp Force Gauge PCE-4PCFM

US$ 15,173.00

ex. VAT, ex. delivery costs

The device clamp force gauge PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gauge is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

- Measuring range: 30,000 N / 3,000 kg / 3 t
- Resolution: 10N / 1kg
- Measurement uncertainty: ±0.5% full scale
- Position of the 4 sensors is adjustable
- Touch display including printer
- Optional: Measurement data storage on USB stick

Force Gage PCE-VTS 50-PFG 500-KIT incl. Test Stand

US$ 2,679.00

ex. VAT, ex. delivery costs

The force gage incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The force gage offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

- Measuring range: 0 ... 500 N
- Resolution: 0.1 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Motorised Force Test Stand PCE-VTS 50
- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"

Force Gage PCE-DFG NF 20K-ICA incl. ISO Calibration Certificate

US$ 2,488.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 20K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate

US$ 2,442.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate

US$ 2,442.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.00074 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate

US$ 2,442.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG NF 2K

US$ 1,491.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs

- Resolution: 0.2 N / 0.04 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display

Force Gage PCE-DFG NF 5K

US$ 1,491.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs

- Resolution: 0.5 N / 0.1 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display

Heavy Duty Scale PCE-CSI 15

US$ 2,831.00

ex. VAT, ex. delivery costs

The heavy duty scale for in-house weighing of up to 15 t. The heavy duty scale has a large shackle on the top and a rotatable hook with a safety catch on the underside. The heavy duty scale is operated using the infrared remote control supplied.

- Weighing range: 15,000 kg / 33,069 lb
- Resolution: 5 kg / 11 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook

Force Gage PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate

US$ 2,349.00

ex. VAT, ex. delivery costs

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-N50F

US$ 904.00

ex. VAT, ex. delivery costs

The force gage is suitable for panel mounting. This force gage can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gage.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display

Force Gage PCE-DDM 3WI

US$ 1,214.00

ex. VAT, ex. delivery costs

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied without remote control indicator

Force Gage PCE-DFG N 5K

US$ 1,399.00

ex. VAT, ex. delivery costs

The force gage PCE DFG N 5K measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Force Gage PCE-DFG N 20K-ICA incl. ISO Calibration Certificate

US$ 1,847.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG N 20K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 20 kN / 20,000 N
- Resolution: 0.002 kN / 2 N
- Accuracy: ± 0.2% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate