Products for 'Flow Meter PCE TDS 100HSH incl. Thermometer '

Ultrasonic HVAC Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 2,520.00

ex. VAT, ex. delivery costs

The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
- incl. ISO Calibration Certificate

HVAC Meter PCE-TDS 100H-ICA incl. ISO Calibration Certificate

US$ 2,190.00

ex. VAT, ex. delivery costs

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic HVAC meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Tester PCE-TDS 100HS-ICA incl. ISO Calibration Certificate

US$ 2,190.00

ex. VAT, ex. delivery costs

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Test Instrument PCE-TDS 100H

US$ 1,841.00

ex. VAT, ex. delivery costs

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in. Software sold separately - see accessories for details.

Ultrasonic Flow Test Instrument PCE-TDS 100HS

US$ 1,841.00

ex. VAT, ex. delivery costs

PCE-TDS 100HS is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.

Ultrasonic Flow Tester PCE-TDS 100HS

US$ 1,841.00

ex. VAT, ex. delivery costs

PCE-TDS 100HS is a portable handheld clamp-on ultrasonic flow tester or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 ... 4in. Software sold separately - see accessories for details.

Ultrasonic Flow Tester PCE-TDS 100H

US$ 1,841.00

ex. VAT, ex. delivery costs

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow tester or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in. Software sold separately - see accessories for details.

Ultrasonic Flow Tester PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this ultrasonic flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

HVAC Meter PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

HVAC Meter PCE-TDS 100H

US$ 1,841.00

ex. VAT, ex. delivery costs

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow meter or HVAC meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in. Software sold separately - see accessories for details.

PCE-TDS 200 MR SENSOR On Rail sensors for the Ultrasonic Flow Meter

US$ 892.00

ex. VAT, ex. delivery costs

Separate on-rail sensors for pipe sizes DN 50 ... 700 / 57 ... 720 mm. The temperature resistance is between -30 ... 160 °C. The sensor on the respective rail is located on a rail and can therefore be positioned appropriately.

Magnets are located underneath the rails which enable it to hold on to pipes with a ferrous metal by itself.

- Pipe sizes: DN 50 ... 700 / 57 ... 720 mm / 1.9 ... 27.5 / 2.2 ... 28.3"
- Temperature resistance: -30 ... 160 °C / -22 ... 320 °F

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
in order to match the sensor to the hand-held unit!

PCE-TDS 200 L SENSOR for the Ultrasonic Flow Meter

US$ 863.00

ex. VAT, ex. delivery costs

Large sensor pair for pipe diameters DN 300 ... 6000 mm. This sensor pair is therefore suitable for particularly large pipes. The sensors for the ultrasonic flow meter can be attached with detachable cable ties. Thanks to the built-in magnets, the sensors can be attached to pipes with ferrous metal. The sensors have a dimension of 91 x 52 x 44 mm.

- Pipe diameter: DN 300 ... 6000 mm / 11.8 x 236"
- Dimension: 91 x 52 x 44 mm / 3.5 x 2.0 x 1.7"

- Important! If you order the sensor later, we need the PCE-TDS 200 handheld unit,
to adjust the sensor to the handheld unit!

PCE-TDS 200 SR SENSOR On Rail sensors for the Ultrasonic Flow Meter

US$ 752.00

ex. VAT, ex. delivery costs

Connected on-rail sensors for pipe sizes DN 15 ... 100 / 20 ... 108 mm. Both sensors are located on one rail to simplify the positioning of the sensors. For easier handling, there is a corresponding handle on the rail.

Magnets are located underneath the rails to enable it to hold on to pipes with a ferrous metal by itself.

- Pipe sizes: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
in order to match the sensor to the hand-held unit!

Dew Point Thermometer for Compressed Air PCE-DPM 10-SFKIT incl. Smart Features

US$ 5,438.00

ex. VAT, ex. delivery costs

The dew point thermometer for compressed air enables precise determination of the dew point in pressurised systems. Thanks to its robust design, the device can be used for industrial applications up to 15 bar.

- Dew point measuring range from -100 ... +50 °C

- Pressure range up to 15 bar differential pressure

- Data logger for up to 100 million measured values

- Adjustable alarm limits

- Touch LC display

- Smart features:

- Prediction of the final dew point value

- Camera function

- PDF report function in accordance with ISO 8573-1

Melt Flow Tester PCE-MFI 400-US

US$ 9,860.00

ex. VAT, ex. delivery costs

The material flow tester is used for rapid testing of the melt mass flow rate of plastics. The material flow tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000

Material Flow Index Tester / Plastometer PCE-MFI 400-US

US$ 9,860.00

ex. VAT, ex. delivery costs

The material flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow index tester device is designed for both incoming goods inspection and continuous production monitoring.

PCE-TDS 200 M SENSOR for the Ultrasonic Flow Meter

US$ 414.00

ex. VAT, ex. delivery costs

Medium-sized sensor pair for pipe diameters DN 50 ... 700 / 57 ... 720 mm. Suitable for flow measurement on medium-sized pipes. With the built-in magnets on the sensors for the ultrasonic flow meter, they can be attached to ferrous pipes. Alternatively, the sensors can be mounted to the pipe with detachable cable ties. The temperature resistance is between -30 ... 160 °C.

- Pipe diameter: DN 50 ... 700 / 57 ... 720 mm / 1.9 ... 27.5 / 2.2 ... 28.3"
- Temperature resistance: -30 ... 160 °C / -22 ... 320 °F

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
in order to match the sensor to the hand-held unit!

PCE-TDS 200 S SENSOR for the Ultrasonic Flow Meter

US$ 414.00

ex. VAT, ex. delivery costs

Medium-sized sensor pair for pipe diameters DN 15 ... 100 / 20 ... 108 mm. Suitable for flow measurement on medium-sized pipes. The sensors of the ultrasonic flow meter can be attached to ferrous pipes with the built-in magnets. Alternatively, the sensors can be mounted to the pipe with detachable cable ties. The temperature resistance is between -30 ... 160 °C.

- Pipe diameter: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"
- Temperature resistance: from -30 ... 160 °C / -22 ... 320 °F
- Dimension: 45 x 30 x 30 mm / 1.7 x 1.1 x 1.1"

- Important! If you order the sensor later, we need the PCE-TDS 200 hand-held unit,
in order to match the sensor to the hand-held unit!