Products for 'Current Clamp PCE CM 5 ICA incl. ISO Calibration Certificate '

Clamp Meter PCE-PA 8000-ICA incl. ISO Calibration Certificate

US$ 2,838.00

ex. VAT, ex. delivery costs

PCE-PA 8000 is a portable handheld Clamp Meter used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

- True RMS measurement for ACA, ACV
- True power: W, KW, MW
- VA, KVA, MVA, VAR, KVAR, MVAR
- PF (power factor), phase angle (Φ)
- KWH, KVAH, KVARH, PFH
- Voltage measurement range: 10 ... 600 ACV
- Current measurement range: 0.2 ... 1200 ACA
- Real-time current, voltage and power consumption measurement
- Built-in data recorder with adjustable sample rate: 2 ... 7,200 sec.
- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS+ 200 SML-ICA incl. ISO-Calibration Certificate

US$ 6,176.00

ex. VAT, ex. delivery costs

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters DN 20-108 mm / 50-700 mm / 315-6000 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp Meter PCE-360-ICA incl. ISO Calibration Certificate

US$ 2,600.00

ex. VAT, ex. delivery costs

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB
(non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
- incl. ISO Calibration Certificate
- incl. ISO Calibration Certificate

Clamp-On Tester PCE-360-ICA incl. ISO Calibration Certificate

US$ 2,600.00

ex. VAT, ex. delivery costs

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

Current Clamp PCE-CM 3-ICA incl. ISO Calibration Certificate

US$ 288.00

ex. VAT, ex. delivery costs

The current clamp is used for quick and easy AC measurements. For current measurement, the current clamp is plugged over the live conductor. The current clamp is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
CAT II 1000V
CAT III 600V
- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ SL-ICA incl. ISO Calibration Certificate

US$ 5,222.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm, DN 300 ... 6000 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: Flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ ML-ICA incl. ISO-Calibration Certificate

US$ 5,222.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0,001 m/s

- incl. sensor set

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm, DN 300 ... 6000 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200 SML-ICA incl. ISO-Calibration Certificate

US$ 4,620.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters DN 20-108 mm / 50-700 mm / 315-6000 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate

US$ 4,509.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ M-ICA incl. ISO Calibration Certificate

US$ 4,263.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certificate

Clamp on Meter PCE-CM 40-ICA incl. ISO Calibration Certificate

US$ 356.00

ex. VAT, ex. delivery costs

The flexible digital Clamp on Meter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible Clamp on Meter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate

Clamp Meter PCE-CM 40-ICA incl. ISO Calibration Certificate

US$ 356.00

ex. VAT, ex. delivery costs

The flexible digital clamp meter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible clamp meter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S-ICA incl. ISO-Calibration Certificate

US$ 4,263.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 15 ... 100 / 20 ... 108 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Current Clamp PCE-MCM 10-ICA incl. ISO Calibration Certificate

US$ 581.00

ex. VAT, ex. delivery costs

The current clamp has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the current clamp is a particularly accurate measuring instrument. In order to conveniently perform measurements with the current clamp, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable current clamp with 1 m / 3.3 ft cable

- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ L-ICA incl. ISO Calibration Certificate

US$ 4,395.00

ex. VAT, ex. delivery costs

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certifikcate

Current Clamp PCE-PA 8500

US$ 4,326.00

ex. VAT, ex. delivery costs

The current Clamp redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The current Clamp allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

Clamp-on Ultrasonic Flow Meter PCE-TDS 100HMHS-ICA incl. ISO Calibration Certificate

US$ 3,419.00

ex. VAT, ex. delivery costs

The Clamp-on Ultrasonic Flow Meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The Clamp-on Ultrasonic Flow Meter works according to the transit time difference method. The measuring principle of the flow meter is quite simple.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")
20 …108 mm (approx. 0.8 … 4.2")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-HM and TDS-HS on rails
- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200 ML-ICA incl. ISO-Calibration Certificate

US$ 3,889.00

ex. VAT, ex. delivery costs

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0,001 m/s

- incl. sensor set

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm, DN 300 ... 6000

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate