Technical Support

Technical advice

Monday - Friday
9 am - 5 pm ET

(561) 320-9162

2 Years Warrenty 2 Years Warrenty

2-Year Warranty

All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects

  1. You are here:
  2. Home
  3. Products for 'Calibration Standard 50% for RH5 '
IoT Sensor PCE-ITE 50
US$ 1,392.00
ex. VAT, ex. delivery costs
Wireless

The PCE-ITE 50 is a robust IoT sensor with a large 3.5" TFT color LCD display. The IoT sensor also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.


- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

Details
Current Clamp PCE-DC 50-ICA incl. ISO Calibration Certificate
US$ 466.00
ex. VAT, ex. delivery costs
ISO Calibration
The current clamp PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the current clamp can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate
Details
Voltmeter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeterPCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Hygrometer PCE-THD 50-ICA incl. ISO Calibration Certificate
US$ 376.00
ex. VAT, ex. delivery costs
ISO Calibration
The hygrometer is the ideal measuring device to check the climatic conditions in, for example, warehouses, production halls or greenhouses. The hygrometer can measure the ambient temperature and humidity.

- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple
- incl. ISO Calibration Certificate
Details
Environmental Tester PCE-THD 50-ICA incl. ISO Calibration Certificate
US$ 376.00
ex. VAT, ex. delivery costs
ISO Calibration
The environmental tester is the ideal measuring device to check the climatic conditions in, for example, warehouses, production halls or greenhouses. The environmental tester can measure the ambient temperature and humidity.

- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple
- incl. ISO Calibration Certificate
Details
Current Clamp PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 current clamp is used to measure the current of 1- or 3-phase loads. This current clamp PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the current clamp.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Force Gauge PCE-PFG 50
US$ 693.00
ex. VAT, ex. delivery costs
The PCE-PFG force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Details
Force Gage PCE-VTS 50-PFG 500-KIT incl. Test Stand
US$ 2,679.00
ex. VAT, ex. delivery costs
The force gage incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The force gage offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

- Measuring range: 0 ... 500 N
- Resolution: 0.1 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Motorised Force Test Stand PCE-VTS 50
- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"
Details
PCE-VTS 50-PFG 500-KIT incl. Force Test Stand and Force Gauge
US$ 2,679.00
ex. VAT, ex. delivery costs
The force gauge incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

- Measuring range: 0 ... 500 N
- Resolution: 0.1 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Motorised Force Test Stand PCE-VTS 50
- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"
- 220V AC ONLY
Details
1-Phase Power Meter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 1-phase power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
HVAC Meter PCE-THD 50-ICA incl. ISO Calibration Certificate
US$ 376.00
ex. VAT, ex. delivery costs
ISO Calibration
The HVAC meter is the ideal measuring device to check the climatic conditions in, for example, warehouses, production halls or greenhouses. The HVAC meter can measure the ambient temperature and humidity.

- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple
- incl. ISO Calibration Certificate
Details
Durometer PCE-PFG 50
US$ 693.00
ex. VAT, ex. delivery costs
The PCE-PFG Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Details
Three-Phase Power Analyzer PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The 3-phase power meter / 3-phase power analyzer is used to measure the current of 1- or 3-phase loads. This 3-phase power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 3-phase power analyzer.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Hay Hygrometer PCE-HMM 50
US$ 659.00
ex. VAT, ex. delivery costs

The hay hygrometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay hygrometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay hygrometer proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

Details
DAkkS calibration for sound level meter
US$ 343.00
ex. VAT, ex. delivery costs
DAkkS calibration certificate for sound level meters, certifies the traceability to national test standards. In this case for the DIN ISO 17025 standard.

- DAkkS calibration
- 2 point calibration 94 dB and 124 dB
- DIN ISO 17025 standard

N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.
Details
Power Meter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Clamp Meter PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details
Clamp on Tester PCE-GPA 50
US$ 995.00
ex. VAT, ex. delivery costs
The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Details