Order no.: PCE-CT 80-ICA
The paint layer surface tester PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
- Incl. ISO laboratory calibration certificate
Manufacturer: PCE Instruments
US$ 922.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 80-ICA
The paint layer thickness gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
US$ 922.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 80-ICA
The paint layer thickness meter PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
US$ 922.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LOC 20
The calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the calibrator to be used to set process displays, data loggers, paperless recorders, etc. The calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RTD 20
The RTD calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LOC 20
The current calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current calibrator to be used to set process displays, data loggers, paperless recorders, etc. The current calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RTD 20
The RTD current calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD current calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD current calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LOC 20
The current/voltage data logger PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current/voltage data logger to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IT414

Insulation Meter for high tension up to 10,000 volts.


- For professionals
- 6 digit LCD
- Measurements according to VDE 0413 part 1
- Test tension up to 10,000V

 

Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LOC 20
The process calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the process calibrator to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RTD 20
The RTD process calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD process calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD process calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LOC 20
The voltage calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the voltage calibrator to be used to set process displays, data loggers, paperless recorders, etc. The voltage calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RTD 20
The RTD voltage calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD voltage calibrator is able to be used as a calibrator for temperature measuring devices. You can buy the RTD voltage calibrator PCE-RTD 20 here in our online shop.

- Simulation and measurement mode
- Graphic LCD
- 24V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Air Quality Meter has many functions. With the Air Quality Meter it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 915.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Air Sampling Device has many functions. With the Air Sampling Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 915.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Dust Measuring Device has many functions. With the Dust Measuring Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 915.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Environmental Testing Device has many functions. With the Environmental Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 915.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Fine Dust Measuring Device has many functions. With the fine dust measuring device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 915.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Particle Counter Device has many functions. With the Particle Counter Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 915.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RS 27

Rigid Inspection Camera for visual inspection in small and narrow holes and cavities. With a diameter of 2.7 mm / 0.11 in and a length of 175 mm / 6.9 in this rigid Inspection Camera is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.


- Diameter 2.7 mm / 0.11 in
- Useful length 175 mm / 6.9 in
- LED lighting
- Battery operation

 

Manufacturer: PCE Instruments
US$ 908.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer