Water Analysis Meter PCE-PH 228LIQ
US$ 901.00
ex. VAT, ex. delivery costs
The Water Analysis Meter stands for precision, user-friendliness and GLP compliance. Good Laboratory Practice With a high-resolution LCD screen, the Water Analysis Meter provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

  • measurement range -2 ... +20 pH (meter)
  • measurement range 0 ... 14 pH (electrode)
  • high accuracy ±0.002 pH + 2 digits
  • adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
  • GLP data management
  • simple 2, 3, 4 and 5-point calibration
  • calibration reminder
  • graphical display of the measurement process
  • data logger
  • especially for beer, blood, dairy products
Closing Force Measuring Device BIA Class 2 for bus doors
US$ 895.00
ex. VAT, ex. delivery costs
ISO Calibration

The original BIA class 2 is a mechanical closing force measuring device for bus doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

  • Measuring range and sensor must be selected!
  • Stiffness: 10 N/mm or 25 N/mm depends on the sensor selection
  • Accuracy: +/- 10 N or 5% of reading
  • Measuring principle: slave pointer
  • Precise measurements
  • Easy to use
  • Standards and directives: 2001 85 EC
  • incl. ISO calibration certificate

Brightness Tester PCE-WNM 100
US$ 892.00
ex. VAT, ex. delivery costs

The PCE-WNM 100 brightness tester is used to measure the whiteness of flat surfaces or powders. In particular, the brightness tester can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

  • Measuring range: 0 … 120 
  • Resolution: 0.1
  • Repeat accuracy : < 0.5
  • R457 nm LED illumination
  • 45/0 measuring geometry
  • For many surfaces and materials

Color Meter PCE-WNM 100
US$ 892.00
ex. VAT, ex. delivery costs
The PCE-WNM 100 Color Meter is used to measure the whiteness of flat surfaces or powders. In particular, the Color Meter can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

  • Measuring range: 0 … 120 
  • Resolution: 0.1
  • Repeat accuracy : < 0.5
  • 457 nm LED illumination
  • 45/0 measuring geometry
  • For many surfaces and materials
Colorimeter PCE-WNM 100
US$ 892.00
ex. VAT, ex. delivery costs
The PCE-WNM 100 Colorimeter is used to measure the whiteness of flat surfaces or powders. In particular, the Colorimeter can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

  • Measuring range: 0 … 120 
  • Resolution: 0.1
  • Repeat accuracy : < 0.5
  • 457 nm LED illumination
  • 45/0 measuring geometry
  • For many surfaces and materials
Paint Test Equipment PCE-WNM 100
US$ 892.00
ex. VAT, ex. delivery costs
The paint test equipment is used to measure the whiteness of flat surfaces or powders. In particular, the paint  test equipment can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

  • Measuring range: 0 … 120 
  • Resolution: 0.1
  • Repeat accuracy : < 0.5
  • 457 nm LED illumination
  • 45/0 measuring geometry
  • For many surfaces and materials
Whiteness Meter PCE-WNM 100
US$ 892.00
ex. VAT, ex. delivery costs

The PCE-WNM 100 whiteness meter is used to measure the whiteness of flat surfaces or powders. In particular, the whiteness meter can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

  • Measuring range: 0 … 120 
  • Resolution: 0.1
  • Repeat accuracy : < 0.5
  • R457 nm LED illumination
  • 45/0 measuring geometry
  • For many surfaces and materials

Force Gage PCE-FM 200-ICA incl. ISO Calibration Certificate
US$ 891.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gage PCE-FM 200-ICA is a handheld device that measures up to 200 N. The force gage can determine the units N, kg and lb. The force gage is supplied with various adapters that have different shapes. The force gage can measure both tensile and compressive forces.

  • Measuring range: 2 … 200 N / 0.2 … 20  kg / 0.4 … 45 lbs
  • Measurement accuracy: ±0.5%
  • Units: N, KG, lb
  • Integrated load cell with M6 connection
  • Evaluation via USB interface
  • Downloadable evaluation software
  • Incl. ISO Calibration Certificate
Force Gauge PCE-FM 200-ICA incl. ISO Calibration Certificate
US$ 891.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gauge PCE-FM 200-ICA is a handheld device that measures up to 200 N. The force gauge can determine the units N, kg and lb. The force gauge is supplied with various adapters that have different shapes. The force gauge can measure both tensile and compressive forces.

  • Measuring range: 2 … 200 N / 0.2 … 20  kg / 0.4 … 45 lbs
  • Measurement accuracy: ±0.5%
  • Units: N, KG, lb
  • Integrated load cell with M6 connection
  • Evaluation via USB interface
  • Downloadable evaluation software
    - Incl. ISO Calibration Certificate