Industrial Measurement Products and Solutions
Order no.: PCE-VDR 10-ICA

PCE-VDR 10-ICA is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble to control systems.

- Acceleration measuring range: 
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges: 
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 928.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Gasman-O3

The Air Quality Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

Three-Phase Clamp Meter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

Clamp on Tester with network Analyzer / Clamp on Tester with data logger. The Clamp on Tester (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. As all test instruments, the Clamp on Tester is delivered manufacturer calibrated (ISO certification is available optional).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

The Three-Phase Current Clamp (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Gasman-NH3

The Gas Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Gasman-O3

The Gas Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery 

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Gasman-NH3

The Gas Leak Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NH3 (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Gasman-O3

The Gas Leak Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

HVAC Meter with network Analyzer / Clamp on Tester with data logger.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ITE 50

The PCE-ITE 50 is a robust insulation tester with a large 3.5" TFT color LCD display. The insulation tester PCE-ITE 50 also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.


- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

 

Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Gasman-O3

The Ozone Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Ozone Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Ozone Meter fulfills all the European and international norms, even ATEX and UL standards.


- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery 

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

This power analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacurer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

The power data logger (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

Three-Phase Digital Multimeter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

Three-Phase Electrical Tester with network analyzer / power and energy meter with data logger.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration analyzer is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration meter is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration sensor is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
US$ 927.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer