Durometer for Metals PCE-2800
US$ 1,938.00
ex. VAT, ex. delivery costs

PCE-2800 is a portable handheld material hardness tester or durometer designed for the quick and easy surface hardness testing of metals. This user-friendly device displays measurements in Rockwell A, B & C (HRA, HRB & HRC), Vickers (HV), Brinell (HB), Shore (HS) and Leeb (HLD) hardness units. It also indicates the tensile strength (N / mm²).

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 350-800 HLD, 59.1-85.8 HRA, 13.5-101.7 HRB, 20-68.5 HRC, 19-651 HB, 80-976 HV, , 32.2-99.5 HS, 374-2652 (N / mm²)
- Accuracy: ± 0.8%, Repeatability: ± 0.8%
- Impact Device: Type D (external probe with 1.5 m / .06 in long cable)
- Data interface: USB 1.1 port; Internal memory: Stores up to 100 data sets
PC-compatible software and data cable for analysis, reporting and archival.
- Printer is built into the device

Flow Meter PCE-UFM 65CU
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
Flow Meter PCE-UFM 65PVC
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
Heat Pump Test Equipment PCE-UFM 65CU
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
Heat Pump Test Equipment PCE-UFM 65PVC
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
HVAC Meter / HVACR Tester PCE-UFM 65CU
US$ 2,079.00
ex. VAT, ex. delivery costs
Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
HVAC Meter / HVACR Tester PCE-UFM 65PVC
US$ 2,079.00
ex. VAT, ex. delivery costs
Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
Ultrasonic Flow Meter PCE-UFM 65CU
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Ultrasonic Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
Ultrasonic Flow Meter PCE-UFM 65PVC
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Ultrasonic Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
Ultrasonic Tester / Ultrasonic Testing PCE-UFM 65CU
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
Ultrasonic Tester / Ultrasonic Testing PCE-UFM 65PVC
US$ 2,079.00
ex. VAT, ex. delivery costs
Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


  • Measurement geometry: 20° / 60° / 85°
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
  •  Incl. ISO calibration certificate

NDT Test Instruments PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


  • Measurement geometry: 20° / 60° / 85°
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Measuring range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU 
  •  Incl. ISO calibration certificate

Paint Gloss Tester PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


  • Measurement geometry: 20° / 60° / 85°
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
  •  Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


  • Measurement geometry: 20° / 60° / 85°
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Measuring range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU 
  •  Incl. ISO calibration certificate

Crane Scales PCE-DDM 3-ICA Incl. ISO Calibration
US$ 2,064.00
ex. VAT, ex. delivery costs
ISO Calibration

The crane scales are ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the crane scales. Despite the high measuring capacity, these materials enable a compact design with a low weight.

  • Measurement range: 3,000 kg / 30 kN / 6,614 lbs
  • Resolution: 1 kg / 10 N
  • Minimum load: 10 kg
  • Supplied with remote control indicator
  • Incl. ISO calibration certificate

Force Gage PCE-DDM 3-ICA Incl. ISO Calibration
US$ 2,064.00
ex. VAT, ex. delivery costs
ISO Calibration

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

  • Measurement range: 3,000 kg / 30 kN / 6,614 lbs
  • Resolution: 1 kg / 10 N
  • Minimum load: 10 kg
  • Supplied with remote control indicator
  • Incl. ISO calibration certificate

Force Gauge PCE-DDM 3-ICA Incl. ISO Calibration
US$ 2,064.00
ex. VAT, ex. delivery costs
ISO Calibration

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

  • Measurement range: 3,000 kg / 30 kN / 6,614 lbs
  • Resolution: 1 kg / 10 N
  • Minimum load: 10 kg
  • Supplied with remote control indicator
  • Incl. ISO calibration certificate