Order no.: CA-B102

The CA-B102 Current Clamp is designed for fast location of insulation faults. The Current Clamp has a maximum diameter up to 112 mm (4.4 in), and can be used with multimeters. Two selectable measuring ranges are available to allow for precise measurement according to DIN VDE 010.
- Dual range: 4 A and 400 A AC
- Large jaw diameter: 112 mm / 4.4 in
- For measurement according to DIN VDE 0100

Manufacturer: Chauvin Arnoux GmbH
US$ 1,144.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IR 31

PCE-IR 31 is a non-contact digital infrared thermometer or temperature meter for high-temperature applications. Made of stainless steel and designed for use in harsh industrial conditions, the temperature meter features an IP 65 rating. The device measures infrared radiation and converts it into an analog and switching signal. The switching signal can be used as an opener or closer. In addition, the temperature meter shows the measured value on the built-in LED screen.


- Measuring range: 0 ... 1000°C / 32 ... 1832°F
- M12 thread 5-pin connection
- Quick response time 

 

Manufacturer: PCE Instruments
US$ 1,144.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IR 31

PCE-IR 31 is a non-contact digital infrared thermometer or temperature meter for high-temperature applications. Made of stainless steel and designed for use in harsh industrial conditions, the temperature meter features an IP 65 rating. The device measures infrared radiation and converts it into an analog and switching signal. The switching signal can be used as an opener or closer. In addition, the temperature meter shows the measured value on the built-in LED screen.


- Measuring range: 0 ... 1000°C / 32 ... 1832°F
- M12 thread 5-pin connection
- Quick response time


Manufacturer: PCE Instruments
US$ 1,144.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CA-B102

The CA-B102 Power Analyzer is designed for fast location of insulation faults. The Power Analyzer has a maximum diameter up to 112 mm (4.4 in), and can be used with multimeters. Two selectable measuring ranges are available to allow for precise measurement according to DIN VDE 010.
- Dual range: 4 A and 400 A AC
- Large jaw diameter: 112 mm / 4.4 in
- For measurement according to DIN VDE 0100

Manufacturer: Chauvin Arnoux GmbH
US$ 1,144.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSM 100
The camera microscope PCE-WMS 100 is the ideal aid for repair and service workshops. Thanks to the movable camera arm, the camera can be precisely aligned by the camera microscope on the object to be optically examined.

- Resolution: 2304 x 1536 pixels
- Magnification: 4.8x ... 220x
- Light source: LED ring light
- Full-HD resolution
- HDMI & USB interface
- SD memory to 64 GB
Manufacturer: PCE Instruments
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 5K
The dynamometer PCE DFG N 5K measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. You can buy the dynamometer PCE-DFG N 5K here in our online shop. 

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 5K
The force gauge PCE DFG N 5K measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. You can buy the force gauge PCE-DFG N 5K here in our online shop. 

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSM 100
The Inspection Camera PCE-WMS 100 is the ideal aid for repair and service workshops. Thanks to the movable camera arm, the camera can be precisely aligned by the inspection camera on the object to be optically examined.

- Resolution: 2304 * 1536 pixels
- Magnification: 4.8x ... 220x
- Light source: LED ring light
- Full-HD resolution
- HDMI & USB interface
- SD memory to 64 GB
Manufacturer: PCE Instruments
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU

 

Manufacturer: PCE Instruments
US$ 1,137.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100

The PCE-PGM 100 NDT tester or gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU

 

Manufacturer: PCE Instruments
US$ 1,137.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 

 

Manufacturer: PCE Instruments
US$ 1,137.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-IR-2

The Xgard-IR-2 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO2, 0 ... 2 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO2, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,136.80

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-IR-3

The Xgard-IR-3 is a single-gas Gas Leak Detector used to warn for gases (Inflammable Gases, 0 ... 100 % LEL), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Inflammable Gases, 0 ... 100 % LEL)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,136.80

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital material hardness tester, rebound hammer or durometer for use with metals. This metal hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.


- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB),
  Vickers (HV), Shore (HS), Leeb (HL) or Strength Value (σb (N/mm²)
- Accuracy: ±2 HL (or 0.3 % @ HL = 800)
- Internal type D rebound mechanism
- Measurement ranges: 170 ... 960 HL, 17 ... 70 HRC, 13 ... 109 HRB, 20 ... 665 HB, 
   80 ... 940 HV, 32 ... 99.5 HS, 30 ... 88 HRA, 255 ... 2639 σb (N/mm²)

- Memory size: 360,000 values
- LED display 
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital metal hardness tester, rebound hammer or durometer. This hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.


- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB),
  Vickers (HV), Shore (HS), Leeb (HL) or Strength Value (σb (N/mm²)
- Accuracy: ±2 HL (or 0.3 % @ HL = 800)
- Internal type D rebound mechanism
- Measurement ranges: 170 ... 960 HL, 17 ... 70 HRC, 13 ... 109 HRB, 20 ... 665 HB, 
   80 ... 940 HV, 32 ... 99.5 HS, 30 ... 88 HRA, 255 ... 2639 σb (N/mm²)

- Memory size: 360,000 values
- LED display 
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital metal hardness tester, rebound hammer or durometer. This hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.


- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB),
  Vickers (HV), Shore (HS), Leeb (HL) or Strength Value (σb (N/mm²)
- Accuracy: ±2 HL (or 0.3 % @ HL = 800)
- Internal type D rebound mechanism
- Measurement ranges: 170 ... 960 HL, 17 ... 70 HRC, 13 ... 109 HRB, 20 ... 665 HB, 
   80 ... 940 HV, 32 ... 99.5 HS, 30 ... 88 HRA, 255 ... 2639 σb (N/mm²)

- Memory size: 360,000 values
- LED display 
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital metal hardness tester, rebound hammer or durometer. This hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.


- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB),
  Vickers (HV), Shore (HS), Leeb (HL) or Strength Value (σb (N/mm²)
- Accuracy: ±2 HL (or 0.3 % @ HL = 800)
- Internal type D rebound mechanism
- Measurement ranges: 170 ... 960 HLD, 17 ... 70 HRC, 13 ... 109 HRB, 20 ... 665 HB, 
   80 ... 940 HV, 32 ... 99.5 HS, 30 ... 88 HRA, 255 ... 2639 σb (N/mm²)

- Memory size: 360,000 values
- LED display 
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer