Ultrasonic Flow Tester PCE-UFM 8
US$ 1,227.00
ex. VAT, ex. delivery costs
With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN8 / 1/4" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size: DN8 / 1/4"
  • Display Type: OLED
  • Analog Output: 4 … 20mA
Ultrasonic testing device PCE-UFM 10
US$ 1,227.00
ex. VAT, ex. delivery costs
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN10 / 3/8" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size: DN10 / 3/8"
  • Display Type: OLED
  • Analog Output: 4 … 20mA
Ultrasonic testing device PCE-UFM 20
US$ 1,227.00
ex. VAT, ex. delivery costs
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size:DN20 / 3/4"
  • Display Type: OLED
  • Analog Output: 4 … 20mA
Ultrasonic testing device PCE-UFM 8
US$ 1,227.00
ex. VAT, ex. delivery costs
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN8 / 1/4" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size: DN8 / 1/4"
  • Display Type: OLED
  • Analog Output: 4 … 20mA
Voltage Calibrator PCE-LOC 20
US$ 1,227.00
ex. VAT, ex. delivery costs
The voltage calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the voltage calibrator to be used to set process displays, data loggers, paperless recorders, etc. The voltage calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Crane Scales PCE-DDM 3WI
US$ 1,224.00
ex. VAT, ex. delivery costs

The PCE-DDM 3WI Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3WI Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


  • Measurement range: 3,000 kg / 30 kN / 6,614 lbs
  • Resolution: 1 kg / 10 N
  • Units of measurement: kg / t / lbs / N / kN
  • Supplied without remote control / indicator

Force Gage PCE-DDM 3WI
US$ 1,224.00
ex. VAT, ex. delivery costs

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

  • Measurement range: 3,000 kg / 30 kN / 6,614 lbs
  • Resolution: 1 kg / 10 N
  • Minimum load: 10 kg
  • Supplied without remote control indicator

Force Gauge PCE-DDM 3WI
US$ 1,224.00
ex. VAT, ex. delivery costs

The PCE-DDM 3WI Force Gauge is the ideal tool for measuring strong tensile forces. The PCE-DDM 3WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


  • Measurement range: 3,000 kg / 30 kN / 6,614 lbs
  • Resolution: 1 kg / 10 N
  • Units of measurement: kg / t / lbs / N / kN
  • Supplied without remote control / indicator

Hanging Scales PCE-DDM 3WI
US$ 1,224.00
ex. VAT, ex. delivery costs

The PCE-DDM 3WI Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


  • Measurement range: 3,000 kg / 30 kN / 6,614 lbs
  • Resolution: 1 kg / 10 N
  • Units of measurement: kg / t / lbs / N / kN
  • Supplied without remote control / indicator