Order no.: PCE-C-R1S 100t

Due to its ball bearing, the load cell has a special resistance against lateral forces. The load cell has a strong output signal of approx. 4 mV / V and works with a measurement uncertainty of 0.03% F.S.. The load cell is used especially in harsh environments such as truck scales, train scales, machine weighing, etc..

- Rated load / force F.S.: 100 t / 1 MN
- Corrosion resistant IP67
- Bearing surface ball bearing
- 700 Ohm

 

- Other force sensor nominal loads available - see variants!

Manufacturer: PCE Instruments
US$ 1,075.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200 Set OZU

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

Manufacturer: Aeroqual
US$ 1,075.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: MCWNT6M-3

The MCWNT6M-3 are verifiable hanging scales, available in three versions, weighing up to a maximum of 6000 kg. With compact dimensions, the hanging scales are useful for many applications. The MCWNT6M is powered by 4 conventional AA batteries. The hanging scales are delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 6000 kg
- Resolution: 2 kg
- Percentage weighing
- EC-Type Approval M III

Manufacturer: Dini Argeo GmbH
US$ 1,075.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200 Set OZU

Ozone Meter AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

Manufacturer: Aeroqual
US$ 1,075.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Material Surface Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.02 to 100um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)

Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.1 to 50um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)

Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Surface Profilometer PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.1 to 50um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)
Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Surface Testing Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.1 to 50um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)

Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-1-SO2

The Xgard-1-SO2 is a single-gas Gassensor used to warn for gases (Sulfur Dioxide, SO2, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO2, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,065.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-1-SO2

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO2, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO2, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,065.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PMP
PMP is a portable handheld moisture analyzer used to take quick, accurate, nondestructive measurements of the moisture or water content and temperature of paper products. Ideal for stacks and rolls of paper products. Minimum material thickness is 25 mm or 1-inch.

- Moisture content range: 1 ... 15%
- Temperature range: 0 ... +50 °C / +32 ... +122 °F
- Resolution: 0.1%
- Measuring depth 20 mm / 0.8"
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 1,064.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PMP
PMP is a portable handheld moisture meter used to take quick, accurate, nondestructive measurements of the moisture or water content and temperature of paper products. Ideal for stacks and rolls of paper products. Minimum material thickness is 25 mm or 1-inch.

- Moisture content range: 1 ... 15%
- Temperature range: 0 ... +50 °C / +32 ... +122 °F
- Resolution: 0.1%
- Measuring depth 20 mm / 0.8"
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 1,064.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PMP
PMP is a portable handheld moisture meter used to take quick, accurate, nondestructive measurements of the moisture or water content and temperature of paper products. Ideal for stacks and rolls of paper products. Minimum material thickness is 25 mm or 1-inch.

- Moisture content range: 1 ... 15%
- Temperature range: 0 ... +50 °C / +32 ... +122 °F
- Resolution: 0.1%
- Measuring depth 20 mm / 0.8"
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 1,064.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MCWNT9RF

The PCE-MCWNT9RF is a verifiable Crane Scale, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the Crane Scale is useful for many applications. The MCWNT9RF is powered by 4 conventional AA batteries. The Crane Scale is delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- 868 MHz Multipoint wireless module for connection to printer or PC

 

Manufacturer: Dini Argeo GmbH
US$ 1,059.95

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MCWNT9RF

The PCE-MCWNT9RF are verifiable hanging scales, available in three versions, weighing up to a maximum of 9000 kg. With compact dimensions, the hanging scales are useful for many applications. The MCWNT9RF is powered by 4 conventional AA batteries. The hanging scales are delivered manufacturer calibrated, but can optionally be certified according to ISO standards.


- Maximum load: 9000 kg
- Resolution: 1 kg - 3000 kg / 2 kg - 6000 kg / 5 kg - 9000 kg
- 868 MHz Multipoint wireless module for connection to printer or PC

Manufacturer: Dini Argeo GmbH
US$ 1,059.95

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HOMMEL ETAMIC P5
The optional mobile, wireless printer HOMMEL-ETAMIC P5 will allow you to print your measured data directly and wirelessly. The mobile roughness tester Hommel Etamic W5 can be easily connected to the printer through the Bluetooth interface.
Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 Industrial Endoscope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m telescopic rod of the industrial endoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the industrial endoscope is supported by the flexible camera head.


- flexible camera head
- 8" LCD monitor
- up to three meters long
- diameter of the camera: 23 mm / 0.9 in
- memory function

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 industrial borescope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the borescope, it is also possible to view areas that are difficult to access. Visual monitoring with the borescope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft  telescopic rod of the inspection camera, it is also possible to view areas that are difficult to access. Visual monitoring with the inspection camera is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IGM 60

The NDT tester or gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
US$ 1,050.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer